تسجيل الدخول
Microsoft.com
 
Microsoft
 
 
 
Microsoft >
> 
OCS 2007 R2 validation error to Edge

Locked OCS 2007 R2 validation error to Edge

  • 15/ذو القعدة/1430 01:34 ص
     
     
    تسجيل الدخول للتصويت
    0
    Hello there,

    Issue is that during the various validations on the front-end server (Enterprise Edition), am getting the following error during the "Connecting to A/V Authentication Edge Server to get credentials" step...

    A/V Authentication Edge Server: Could not contact A/V Authentication Edge SErver.
    To resolve this error, check for the following
    1. The outbound proxy is reachable.
    2. The outbound proxy and A/V Authentication Edge Server are in trusted server list of each otehr.
    3. The outbound proxy and A/V Authentication Edge Server have valid certificates.
    4. Conference Server certificate is valid.
    5. A/V Authentication Edge SErver Gruu is correct.

    Can't connect from outside the LAN yet, so want to resolve this. Any suggestions appreciated.

    Thanks,
    Greg
       

    جميع الردود

    • 15/ذو القعدة/1430 10:18 ص
       
       
      تسجيل الدخول للتصويت
      0
      Have you read the Edge Deployment Guide? (OCS 2007 R2 Deploying Edge Servers.doc)
      http://www.microsoft.com/downloads/details.aspx?familyid=E9F86F96-AA09-4DCA-9088-F64B4F01C703&displaylang=en

      You should certainly look at:
      - Firewall requirements
      - Connect Your Internal Servers with Your Edge Servers

      - Belgian Unified Communications Community : http://www.pro-exchange.be -
         
      • 15/ذو القعدة/1430 02:49 م
         
         
        تسجيل الدخول للتصويت
        0
        Hello Deli,

        Yes, I have read this and all the other latest OCS 2007 R2 deployment documentation, have run the planning tools for edge/front-end, and have gone back/forth/the other serveral times regarding this. I have configured all the necessary DNS records internally/externally (I think), but still can't connect. Interestingly enough, I had this working once in another environment but this time around am not finding the "missing link" yet.

        Basically I can telnet the ports needed both internally and externally, am getting no certificate errors, and am unsure what is missing.

        Thanks,
        Greg
           
        • 15/ذو القعدة/1430 06:46 م
           
           
          تسجيل الدخول للتصويت
          0
          Hi,

          what edge interface did you configure for A/V authentification on your fronnt-end ?
          ThorstenWujek
             
          • 15/ذو القعدة/1430 08:58 م
             
             
            تسجيل الدخول للتصويت
            0
            Hello Thorsten,

            I just checked, and it is pointing to the Edge server's internal LAN adapter via the server's internal FQDN, and using port 5062.
            Also media port range is set to what I believe was the default, the range being 49152 - 65535
            Encryption Level says "Require encryption"
               
            • 02/ذو الحجة/1430 11:04 ص
               
               
              تسجيل الدخول للتصويت
              0
              Hi,

              Can you do a nslookup and does it resolve the same IP as you specified as the internal interface?
              Does the edge server validation run fine?

              Can you do a telnet from the edge server towards the next hop internal address on port 5061?

              Jeroen
              Microsoft minded UC specialist - http://www.reijling.nl
                 
              • 02/ذو الحجة/1430 02:03 م
                المشرف
                 
                 
                تسجيل الدخول للتصويت
                0
                Are you receiving any errors in the Event Log related to this? Take a look at this blog for an example of troubleshooting a specific A/Authentication issue: http://blogs.pointbridge.com/Blogs/schertz_jeff/Pages/Post.aspx?_ID=68

                It may not be the exact errors you are seeing but it should help guide you toward troubleshooting the issue.
                Jeff Schertz, PointBridge | MVP | MCITP: Enterprise Messaging | MCTS: OCS
                   
                • 02/ذو الحجة/1430 02:24 م
                   
                   الإجابة
                  تسجيل الدخول للتصويت
                  0
                  Hello guys,

                  Thanks for responses. You know what? I should have updated this thread. Turns out that I had all the configurations set right (after many reads of posts of yours and by others Jeff), and the problem was that I was using Windows Server 2008 R2 for all the servers.

                  SO after doing it all over again with new installs of Windows Server 2008 (not R2, but just with SP2), it immediately began working.
                  Next up, trying to figure out how to properly configure Unified Messaging and connect it to a trial SIP Trunking connection. Hmmmm.

                  Thanks again,
                  Greg
                  • تم الاقتراح كإجابة بواسطة Jeff SchertzMVP, Moderator 02/ذو الحجة/1430 02:52 م
                  • تم وضع علامة كإجابة بواسطة Greg M Palmes 02/ذو الحجة/1430 05:00 م
                  •