Fujitsu Primergy mx130 s1 device driver
-
26. februar 2012 21:10
I was installing Windows Home Server on the Fujitsu Primergy mx130, it finished the main installation and went to the desktop were it continued,an error message came up saying
A network device driver was not found install the appropriate drivers for your network device and the restart your server .
it then had an error message on the Ethernet controller properties which said
The drivers for this device are not installed (code28)
do i need a driver and if so where can i get it from, i have the Fujitsu Primergy mx130 s1.
- Redigeret af adam1234wj 26. februar 2012 21:13
Alle besvarelser
-
26. februar 2012 22:14
Yes you need a Network driver - you will not find a WHS2011 version so use Windows Server 2008 R2 drivers. The Fujitsu site lists 3 potential network chipsets for your server - find which you have and use the 64-bit R2 drivers for it. Failing that use each of the 3 above until one works.
Phil P.S. If you find my comment helpful or if it answers your question, please mark it as such.
- Foreslået som svar af Phil Harrison 26. februar 2012 22:18
- Markeret som svar af adam1234wj 28. februar 2012 17:52
