Anmelden
Microsoft.com
 
Microsoft
 
 
 
Microsoft >
> 
> 
First Install Remote Access worked, second install it wont

Locked First Install Remote Access worked, second install it wont

  • Freitag, 14. Mai 2010 04:28
     
     
    Anmelden
    0

    Interesting...

    I installed WHSV the first time and had no problems whatsoever, even had remote access and domain set up, then when I tried to add an external usb hd, and found I couldnt (eSata), I tried to re-install WHSV with a driver load for the raid, but alas that didnt work either. The second install went fine, but now cannot get remote access up and running, everytime I try to set it up I get errors that the router is not working, that uPnP is not enabled and that port fowarding is not set up. Although I have all that set up properly, eben have the http and https ports set up correctly.

    Not sure why all of a sudden I cannot get remote access to work, any ideas?

     

       

    Alle Antworten

    • Freitag, 14. Mai 2010 18:26
       
       
      Anmelden
      0

      Interesting...

      I installed WHSV the first time and had no problems whatsoever, even had remote access and domain set up, then when I tried to add an external usb hd, and found I couldnt (eSata), I tried to re-install WHSV with a driver load for the raid, but alas that didnt work either. The second install went fine, but now cannot get remote access up and running, everytime I try to set it up I get errors that the router is not working, that uPnP is not enabled and that port fowarding is not set up. Although I have all that set up properly, eben have the http and https ports set up correctly.

      Not sure why all of a sudden I cannot get remote access to work, any ideas?

       


      I had a similar problem: I had to reset the router and do port forwarding again.  It worked.
         
      • Mittwoch, 19. Mai 2010 00:28
         
         
        Anmelden
        0
        Well unfortunately that didnt work for me, I not only reset the router, but upgraded the firmware, but it still gave me the same &&&&, so I tried a factory reset and still no luck at all, I am about fed up and need to get away, thats how pissed I am, sorry.
           
        • Mittwoch, 19. Mai 2010 02:44
           
           
          Anmelden
          0
          Ok I have settled down, I hope. I know it is not my router, everything is set correctly on the router, it has something to do with the server, so I am going to re-install WHS again for the third time and see if that helps. wish me luck.
             
          • Mittwoch, 19. Mai 2010 02:56
            Moderator
             
             
            Anmelden
            0
            Ok I have settled down, I hope. I know it is not my router, everything is set correctly on the router, it has something to do with the server, so I am going to re-install WHS again for the third time and see if that helps. wish me luck.
            If you haven't reinstalled yet (or if it happens again), you should file a bug report on Connect.
               
            • Mittwoch, 19. Mai 2010 05:59
               
               
              Anmelden
              0

              lol... yeah it happened again...

              I can connect to the server from another computer, so i can do everything else, just that remote access wont work at all, I keep getting the same errors, but the router is properly configured, I triple checked, many times, still same thing.

              I will file the bug report, where to?

                 
              • Mittwoch, 19. Mai 2010 07:40
                 
                 
                Anmelden
                0
                I was able to get into the remote access via the dydns.org account, but when I go to the server it still has the same error, cannot connect to router, I reported a bug.