Fujitsu Primergy mx130 s1 device driver
-
Sunday, 26 February 2012 9:10 PM
I was installing Windows Home Server on the Fujitsu Primergy mx130, it finished the main installation and went to the desktop were it continued,an error message came up saying
A network device driver was not found install the appropriate drivers for your network device and the restart your server .
it then had an error message on the Ethernet controller properties which said
The drivers for this device are not installed (code28)
do i need a driver and if so where can i get it from, i have the Fujitsu Primergy mx130 s1.
- Edited by adam1234wj Sunday, 26 February 2012 9:12 PM
- Edited by adam1234wj Sunday, 26 February 2012 9:13 PM
All Replies
-
Sunday, 26 February 2012 10:14 PM
Yes you need a Network driver - you will not find a WHS2011 version so use Windows Server 2008 R2 drivers. The Fujitsu site lists 3 potential network chipsets for your server - find which you have and use the 64-bit R2 drivers for it. Failing that use each of the 3 above until one works.
Phil P.S. If you find my comment helpful or if it answers your question, please mark it as such.
- Proposed As Answer by Phil Harrison Sunday, 26 February 2012 10:18 PM
- Marked As Answer by adam1234wj Tuesday, 28 February 2012 5:52 PM
