Sign in
Microsoft.com
 
Microsoft
 
 
 
Microsoft >
> 
> 
> 
cannot connect to my network too

Locked cannot connect to my network too

  • Saturday, August 02, 2008 1:24 PM
     
     
    Sign In to Vote
    0
    Hi,

    My card is Intel(R) PRO/Wireless 2200BG.
    My IS SSID is "WangLei's Home".

    At first,  i'm using a 128bit wep key, the installation seems good, but the network not work.

    Cannot get a ip from DHCP. I manually set a ip, but cant ping the router's ip address.

    and then, I changed the wep key to a 64bit one, the problem remains.

    and then, I set not to use wep, nothing better.

    I can connect to the router without the VirtualWiFi all the 3 configurations.

    My install process is:
    1. stop the wzc service.
    2. WirelessUtils.exe 2200BG setssid "WangLei's Home" IS -wep enable -auth open -key **********
    ....
    Setmode succeeded
    SetSSID successful
    3. VirtualWiFi.exe install -wep enable -auth open -key **********
    Installing the VirtualWiFi Driver...
    Successfully installed the VirtualWiFi Driver.
    Installing the VirtualWiFi Service ...
    VirtualWiFi install complete.
    VirtualWiFi IS WangLei's HomeThe service is starting.
    And there is a VirualWiFi IS WangLei's Home adapter appears.
    But the connection does not work.

       

    All Replies

    • Saturday, August 02, 2008 2:54 PM
       
       
      Sign In to Vote
      0
      More information:

      If I stop the wzc service, and use WirelessUtils.exe to connect to my network.

      Always fails (Connected, but cannot get DHCP address, manually set ip won't work too.) if I set a wep key (no matter how long the key is.)

      But, if I set do not use wep, WirelessUtils.exe setssid do works, the network function well. The ping goes:
      64 bytes from 192.168.111.1: icmp_seq=940 ttl=150 time=2 ms
      64 bytes from 192.168.111.1: icmp_seq=941 ttl=150 time=2 ms
      64 bytes from 192.168.111.1: icmp_seq=942 ttl=150 time=3 ms
      64 bytes from 192.168.111.1: icmp_seq=943 ttl=150 time=3 ms
      64 bytes from 192.168.111.1: icmp_seq=944 ttl=150 time=3 ms
      64 bytes from 192.168.111.1: icmp_seq=945 ttl=150 time=2 ms
      64 bytes from 192.168.111.1: icmp_seq=946 ttl=150 time=3 ms

      And then, I run the VirtualWiFi.exe install, the adapter will disconnect it self, and then install and reconnect.
      64 bytes from 192.168.111.1: icmp_seq=945 ttl=150 time=2 ms
      64 bytes from 192.168.111.1: icmp_seq=946 ttl=150 time=3 ms
      sendto: No route to host
      ping: wrote 192.168.111.1 64 chars, ret=-1
      ping: recvfrom: No route to host
      sendto: No route to host
      ping: wrote 192.168.111.1 64 chars, ret=-1
      64 bytes from 192.168.111.1: icmp_seq=953 ttl=150 time=4 ms
      37 bytes from 127.0.0.1: icmp_type=3 (Dest Unreachable) icmp_code=3
      37 bytes from 127.0.0.1: icmp_type=3 (Dest Unreachable) icmp_code=3
      37 bytes from 127.0.0.1: icmp_type=3 (Dest Unreachable) icmp_code=3
      37 bytes from 127.0.0.1: icmp_type=3 (Dest Unreachable) icmp_code=3
      37 bytes from 127.0.0.1: icmp_type=3 (Dest Unreachable) icmp_code=3
      37 bytes from 127.0.0.1: icmp_type=3 (Dest Unreachable) icmp_code=3
      37 bytes from 127.0.0.1: icmp_type=3 (Dest Unreachable) icmp_code=3
      37 bytes from 127.0.0.1: icmp_type=3 (Dest Unreachable) icmp_code=3
      sendto: No route to host
      ping: wrote 192.168.111.1 64 chars, ret=-1
      ping: recvfrom: No route to host
      sendto: No route to host

      After reconnected, there is a "      64 bytes from 192.168.111.1: icmp_seq=953 ttl=150 time=4 ms"!
      it do work for a while!
      and then dead again.