Cannot connect with server domain internaly!
-
Monday, May 14, 2012 3:20 AMI can connect from any where out side of my home network to my server domain (WHS 2011) using https://*****.homeserver.com without any problem but when i am trying to connect from home to server on same internal network i get problem "
There is a problem with this website's security certificate.
Click here to close this webpage.
Continue to this website (not recommended).
More information<noscript></noscript> if i click on continue to this website (not recommended) it take me directly to my router setup page. But if i try with ip addres https://192.168.1.60 it shows same above error and when i click on continue it take me to server user login page
How can i fix this problem?
All Replies
-
Monday, May 14, 2012 5:30 AM
The certificates refer to your Internet domain name so you would expect the problem when using an IP address instead. As for using the fully qualified address (https:// etc) from within your network, your router is not fully supporting loopback so you get to the router page which does not match your server certificate! Try http://<server_name> - you will still get the same message but tell your browser not to report it again!
Phil P.S. If you find my comment helpful or if it answers your question, please mark it as such.
- Proposed As Answer by Phil Harrison Monday, May 14, 2012 5:30 AM
-
Monday, May 14, 2012 10:22 AMthanks Phil for reply. Every thing was working fine before, This router was supporting loopback till yesterday, i never had this problem. i reinstalled WHS2011 yesterday and since that i start getting this problem. And now i don't know how to solve it.
- Edited by dilwale Monday, May 14, 2012 10:23 AM
-
Monday, May 14, 2012 11:10 AM
This may help you solve it.
http://social.technet.microsoft.com/wiki/contents/articles/922.windows-home-server-router-setup.aspx
____________
BullDawg
In God We Trust
____________
<dilwale> wrote in message news:34baa393-9bc5-42dc-a73f-cfe665eead63@communitybridge.codeplex.com...
: thanks Phil for reply. Every thing was working fine before, This router was supporting loopback till yesterday, i never had this problem. i reinstalled WHS2011 yesterday and since that i start getting this problem. And now i don't know how to solve it.
:
:
BullDawg- Marked As Answer by Sean Zhu -Moderator Friday, May 18, 2012 7:31 AM
-
Friday, May 18, 2012 12:43 PMthanks BullDawg, it did not help me but your link is very informatic. thanks
