About the "Radio" in PHY
-
jueves, 08 de diciembre de 2011 13:56
Are Tx and Rx and ACK using the same one Radio in PHY? is pPhy->pRadios[0]?
When Sora running at "hRes = (*pPhy->FnPHY_Rx) (pPhy, RADIO_RECEIVE, pRCB)",
at the same time, can it run "hRes = SORA_HW_TX_TRANSFER(pRadio, &pTCB->PacketBase)"?
Todas las respuestas
-
viernes, 09 de diciembre de 2011 18:38
At the current stage of SORA, the TX and RX radio are the same, since only one radio is supported.
You can run Rx and Tx_transfer at the same time, but you cannot run Rx and Tx at the same time.
Danial.F- Marcado como respuesta Kun TanOwner jueves, 22 de marzo de 2012 8:47
-
domingo, 11 de diciembre de 2011 3:57
At the current stage of SORA, the TX and RX radio are the same, since only one radio is supported.
You can run Rx and Tx_transfer at the same time, but you cannot run Rx and Tx at the same time.
Danial.F
Thank you very much.Does that mean there are three buffers in one radio? Rx buffer, Tx buffer and ACK buffer?
Since Tx buffer is 2*1024*1024, why Rx buffer is 16*1024*1024? and ACK max buffer is 16*1024?
-
miércoles, 21 de marzo de 2012 14:19
At the current stage of SORA, the TX and RX radio are the same, since only one radio is supported.
You can run Rx and Tx_transfer at the same time, but you cannot run Rx and Tx at the same time.
Danial.F
Thank you very much.Does that mean there are three buffers in one radio? Rx buffer, Tx buffer and ACK buffer?
Since Tx buffer is 2*1024*1024, why Rx buffer is 16*1024*1024? and ACK max buffer is 16*1024?
Not sure if you are still looking for an answer, but yes, there are three buffers in one radio.
- Editado Jim Bouncer miércoles, 21 de marzo de 2012 14:20
- Marcado como respuesta DHL_ICT viernes, 23 de marzo de 2012 1:17
-
viernes, 23 de marzo de 2012 1:17
At the current stage of SORA, the TX and RX radio are the same, since only one radio is supported.
You can run Rx and Tx_transfer at the same time, but you cannot run Rx and Tx at the same time.
Danial.F
Thank you very much.Does that mean there are three buffers in one radio? Rx buffer, Tx buffer and ACK buffer?
Since Tx buffer is 2*1024*1024, why Rx buffer is 16*1024*1024? and ACK max buffer is 16*1024?
Not sure if you are still looking for an answer, but yes, there are three buffers in one radio.
Many Thanks
