2012. április 12. 20:59I am new to the world of WHS. I have been bless with a Dell PowerEdge 2850 server that I want to use as a home server. It is configured with 6 143gB Ultra 320 SCSI Drives. When starting the installation of WHS 2011 it sees all drives but stops the install because is cannot find a drive of at least 160 gB. Is there a resolution to my problem?
Az összes válasz
2012. április 12. 21:22
Assuming you are talking about WHS 2011, here are the requirements:
Applies To: Windows Home Server 2011
- Windows Home Server 2011 server software is a 64-bit only operating system.
- You can install the server software either manually or unattended.
- 1.4 GHz x64 processor.
- 2 GB RAM
- At least one 160 GB hard drive.
I guess you can set up the RAID and provide drivers during the installation and install on the RAID, but not recommended and I would be inclined to buy a new hard disk that meets the requirement.
Phil P.S. If you find my comment helpful or if it answers your question, please mark it as such.
2012. április 13. 8:16If your server does have a raid card then this page provides guides. http://en.community.dell.com/support-forums/servers/f/906/p/18573536/18696522.aspx#18696522