none
W32 Time

    Pertanyaan

  • Anyone know what this means?




    Event Type: Warning
    Event Source: W32Time
    Event Category: None
    Event ID: 36
    Date:  11/29/2008
    Time:  8:55:33 PM
    User:  N/A
    Computer: HPSERVER
    Description:
    The time service has not synchronized the system time for 86400 seconds  because none of the time service providers provided a usable time  stamp. The time service is no longer synchronized and cannot provide  the time to other clients or update the system clock. Monitor the  system events displayed in the Event  Viewer to make sure that a more  serious problem does not exist.
     
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
     
    30 Nopember 2008 3:40

Jawaban

  • The short answer the time server is probaly unreachable or offline.

    Look at selecting a different time server including one of the Network Time Protocol [NTP] Pools. For example you might use us.pool.ntp.org in the US.

    http://www.pool.ntp.org/zone/north-america

    For example I use 0.us.pool.ntp.org as the server pool of choice for my WHS and clients.

    Other pool servers...

    http://support.ntp.org/bin/view/Servers/NTPPoolServers

    General lists of NTP servers. Note the rules of engagment on each...

    http://tf.nist.gov/service/time-servers.html
    http://tycho.usno.navy.mil/ntp.html
    http://support.ntp.org/bin/view/Servers/WebHome

    With that said I sync time hourly. Its a simple registry change...

    How to change the Windows Vista/XP or Windows Home Server (WHS) internet time update frequency

    The user can increase or decrease the frequency of updates by making a simple registry change. Add or change the SpecialPollInterval DWORD setting. Note the value is in seconds...

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient\

    For example the value is set to 3600 on my Vista/XP/WHS machines (that's in seconds), so the Vista/XP/WHS machines poll the time server once each hour.

    Update Interval Decimal DWORD Value (Seconds)
    1 Minute = 60
    1 Hour = 3600
    1 Day = 86400
    1 Week = 604800

    1. On the WHS/Vista/XP machine, log on as an Administrative user.

    2. Go to Start -> Run and type regedit at the command prompt.

    Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient\

    3. Add or change the DWORD of SpecialPollInterval with a decimal value in seconds.

    4. Go to File -> Exit

    5. Log off the Administrator account and reboot the PC.

    MS-MVP Windows Desktop Experience, "When all else fails, read the instructions"
    30 Nopember 2008 13:13
  • JSHollis said:

    Anyone know what this means?




    Event Type: Warning
    Event Source: W32Time
    Event Category: None
    Event ID: 36
    Date:  11/29/2008
    Time:  8:55:33 PM
    User:  N/A
    Computer: HPSERVER
    Description:
    The time service has not synchronized the system time for 86400 seconds  because none of the time service providers provided a usable time  stamp. The time service is no longer synchronized and cannot provide  the time to other clients or update the system clock. Monitor the  system events displayed in the Event  Viewer to make sure that a more  serious problem does not exist.
     
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
     



    W32Time is a service that will periodically try to synchronize with an NTP (Network Time Protocol) server on the internet (the default is set to time.windows.com).  Apparently your server hasn't reached that site for 24 hours.  However, it's nothing to worry about.  Just ignore it and move on. :)
    30 Nopember 2008 4:48
    Moderator

Semua Balasan

  • JSHollis said:

    Anyone know what this means?




    Event Type: Warning
    Event Source: W32Time
    Event Category: None
    Event ID: 36
    Date:  11/29/2008
    Time:  8:55:33 PM
    User:  N/A
    Computer: HPSERVER
    Description:
    The time service has not synchronized the system time for 86400 seconds  because none of the time service providers provided a usable time  stamp. The time service is no longer synchronized and cannot provide  the time to other clients or update the system clock. Monitor the  system events displayed in the Event  Viewer to make sure that a more  serious problem does not exist.
     
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
     



    W32Time is a service that will periodically try to synchronize with an NTP (Network Time Protocol) server on the internet (the default is set to time.windows.com).  Apparently your server hasn't reached that site for 24 hours.  However, it's nothing to worry about.  Just ignore it and move on. :)
    30 Nopember 2008 4:48
    Moderator
  •  
    W32Time is a service that will periodically try to synchronize with an NTP (Network Time Protocol) server on the internet (the default is set to time.windows.com).  Apparently your server hasn't reached that site for 24 hours.  However, it's nothing to worry about.  Just ignore it and move on. :)


    Apparently it is a fairly common trait not just on WHS but with my 64 bit and 32 bit XP. It even shows up next day sometimes AFTER a manual update has been done & the normal frequency allotted time has not been exceeded. Registry info and policy setting all showed correct. I made mention about it some time ago to another source. But who knows if it will ever be addressed.

    I don't sign in much - I browse a lot - Post even less
    30 Nopember 2008 12:19
  • The short answer the time server is probaly unreachable or offline.

    Look at selecting a different time server including one of the Network Time Protocol [NTP] Pools. For example you might use us.pool.ntp.org in the US.

    http://www.pool.ntp.org/zone/north-america

    For example I use 0.us.pool.ntp.org as the server pool of choice for my WHS and clients.

    Other pool servers...

    http://support.ntp.org/bin/view/Servers/NTPPoolServers

    General lists of NTP servers. Note the rules of engagment on each...

    http://tf.nist.gov/service/time-servers.html
    http://tycho.usno.navy.mil/ntp.html
    http://support.ntp.org/bin/view/Servers/WebHome

    With that said I sync time hourly. Its a simple registry change...

    How to change the Windows Vista/XP or Windows Home Server (WHS) internet time update frequency

    The user can increase or decrease the frequency of updates by making a simple registry change. Add or change the SpecialPollInterval DWORD setting. Note the value is in seconds...

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient\

    For example the value is set to 3600 on my Vista/XP/WHS machines (that's in seconds), so the Vista/XP/WHS machines poll the time server once each hour.

    Update Interval Decimal DWORD Value (Seconds)
    1 Minute = 60
    1 Hour = 3600
    1 Day = 86400
    1 Week = 604800

    1. On the WHS/Vista/XP machine, log on as an Administrative user.

    2. Go to Start -> Run and type regedit at the command prompt.

    Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient\

    3. Add or change the DWORD of SpecialPollInterval with a decimal value in seconds.

    4. Go to File -> Exit

    5. Log off the Administrator account and reboot the PC.

    MS-MVP Windows Desktop Experience, "When all else fails, read the instructions"
    30 Nopember 2008 13:13
  • The short answer the time server is probaly unreachable or offline.

    Look at selecting a different time server including one of the Network Time Protocol [NTP] Pools. For example you might use us.pool.ntp.org in the US.

    http://www.pool.ntp.org/zone/north-america

    For example I use 0.us.pool.ntp.org as the server pool of choice for my WHS and clients.

    Other pool servers...

    http://support.ntp.org/bin/view/Servers/NTPPoolServers

    General lists of NTP servers. Note the rules of engagment on each...

    http://tf.nist.gov/service/time-servers.html
    http://tycho.usno.navy.mil/ntp.html
    http://support.ntp.org/bin/view/Servers/WebHome

    With that said I sync time hourly. Its a simple registry change...

    How to change the Windows Vista/XP or Windows Home Server (WHS) internet time update frequency

    The user can increase or decrease the frequency of updates by making a simple registry change. Add or change the SpecialPollInterval DWORD setting. Note the value is in seconds...

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient\

    For example the value is set to 3600 on my Vista/XP/WHS machines (that's in seconds), so the Vista/XP/WHS machines poll the time server once each hour.

    Update Interval Decimal DWORD Value (Seconds)
    1 Minute = 60
    1 Hour = 3600
    1 Day = 86400
    1 Week = 604800

    1. On the WHS/Vista/XP machine, log on as an Administrative user.

    2. Go to Start -> Run and type regedit at the command prompt.

    Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient\

    3. Add or change the DWORD of SpecialPollInterval with a decimal value in seconds.

    4. Go to File -> Exit

    5. Log off the Administrator account and reboot the PC.

    MS-MVP Windows Desktop Experience, "When all else fails, read the instructions"
    Thank you! This solved my problem. I was having the same issue on our ShoreTel phone server running Windows Server 2003 
    06 September 2013 21:34