Accedi
Microsoft.com
 
Microsoft
 
 
 
Microsoft >
> 
> 
WHS 2011 migration to new hardware

Con risposta WHS 2011 migration to new hardware

  • martedì 22 maggio 2012 15:13
     
     
    Registrati per votare
    0

    I've seen similar posts relating to this but mostly in connection with upgrading versions.

    I have a fully operational server running WHS 2011. I have new different server hardware which I want to migrate to. Has anyone any guidance on this or is it not pratical to undertake in a simplistic manner? I have full back ups and spare external drive capability for the project. Any guidance greatly appreciated.

    Roger

     

Tutte le risposte

  • martedì 22 maggio 2012 21:06
     
     
    Registrati per votare
    0

    If you have enough hardware, build both servers and transfer data from the old to new via your network (hopefully Gbit). If not, move all your data from your primary drive (if you plan to re-use it for the new installation) install and then add all your data drives without formatting them. If you have a Server Backup of your original system (on an external drive) , you could use the  original installation DVDs and do a server re-installation.

    You do not say what "new" server hardware you plan to use so the above can only be taken as general guidance. If you have a new motherboard you may run in to driver issues and your original OEM installation may be tied to your old hardware. This may require Microsoft to be kind to you or in the worst case you may need a new WHS license.

    Phil P.S. If you find my comment helpful or if it answers your question, please mark it as such.

     
  • mercoledì 23 maggio 2012 06:17
     
     
    Registrati per votare
    0
    Yes it is a new (different)  motherboard and I do have sufficient hardware to be flexible. You have spotted that my concern is with trying to restore the 'C' windows drive and retain my existing user etc, configuration. I assume that there's not an 'Easy Transfer' method like they do with the desktop OS?

    Roger

     
  • mercoledì 23 maggio 2012 20:51
     
     
    Registrati per votare
    0
    A server restore will give you that.

    Phil P.S. If you find my comment helpful or if it answers your question, please mark it as such.

     
  • mercoledì 23 maggio 2012 21:12
     
     
    Registrati per votare
    0
    Thanks for that. So I think the plan is to do a new WHS 2011 instal on the new hardware then recover from back up?

    Roger

     
  • mercoledì 23 maggio 2012 22:35
     
     
    Registrati per votare
    0
    No, I would try a direct server recovery from a backup which may work, as long as it can find the correct drivers for your new motherboard.

    Phil P.S. If you find my comment helpful or if it answers your question, please mark it as such.

     
  • giovedì 24 maggio 2012 06:02
     
     
    Registrati per votare
    0
    Thank you for the advice. I will certainly try that over the next couple of days and let you know how I get on.

    Roger

     
  • lunedì 28 maggio 2012 21:19
     
     
    Registrati per votare
    0
    Does 'Direct server recovery' mean something other than a new install followed by a traditional restore as I couldn't get WHS recovery to recognise my back ups?

    Roger

     
  • martedì 29 maggio 2012 00:56
     
     
    Registrati per votare
    0

    Yes, suggest you read the online documentation for Server Backup & Restore, here:

    http://technet.microsoft.com/en-us/library/backup-restore-overview-2.aspx

    Phil P.S. If you find my comment helpful or if it answers your question, please mark it as such.

     
  • martedì 29 maggio 2012 06:24
     
     
    Registrati per votare
    0
    Thanks, bed time reading later.

    Roger

     
  • martedì 29 maggio 2012 21:08
     
     
    Registrati per votare
    0
    The new WHS 2011 install wont recognise the single back up from the previous server, is there a way of loading the catalogue te enable a recovery of the old server back up?

    Roger

     
  • sabato 2 giugno 2012 11:59
     
     Con risposta
    Registrati per votare
    0

    You should try a Server Restore, not a new install. From the online documentation:

    To restore the server system drive

    1. Insert the Windows® Home Server 2011 installation DVD in the server DVD drive, restart the server, and then press any key to start from the DVD.

    2. After the Windows files load, click Repair an existing installation.

    3. On the Select a system image backup page, you can choose to use the latest backup or you can select an earlier backup. The system will be restored to the state that it was at the time of the backup that you choose for restoring or repairing your server. Data that was added or setting changes that were made after that time must be recreated.

    4. Follow the instructions in the wizard.

    5. After the server is successfully restored, click Close to restart the server.

    Phil P.S. If you find my comment helpful or if it answers your question, please mark it as such.

    • Contrassegnato come risposta RogerLC sabato 2 giugno 2012 21:13
    •  
     
  • sabato 2 giugno 2012 21:13
     
     
    Registrati per votare
    0
    Thank you for all your help Phil. In the end it boiled down to the old problem of not tolerating the change in hardware. I had to resort to a new install followed by recreating the shares and user accounts (then moving / restoring data). It wasn't too tedious (public holiday) but I couldn't help feeling that there might have been a simple 'wizard' solution that could have assisted in the migration.

    Roger