サインイン
Microsoft.com
 
IT プロフェッショナルのための技術情報サイト
 
 
 
IT プロフェッショナルのための技術情報サイト > フォーラム ホーム > Windows Home Server Software > Backup problem Unable to create disk snapshot try running chkdsk /f/r
質問する質問する
フォーラムを検索:
 

回答済みBackup problem Unable to create disk snapshot try running chkdsk /f/r

  • 2008年3月17日 1:30Developer Retired ユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     
    サインインして投票
    0
    サインインして投票

    The computer failed to take a snapshot of the volume for backup. To resolve this problem try running chkdsk /f/r.

    I ran chkdsk /f /r several times with no errors and to no avail. I reinstalled the connector software, rebooted the server, nothing worked.

    By the way I have had no problems with the laptop drive I’m a developer and use it every day developing medical imaging software.  The drive is a 52gb drive with 20gb of free space.

    Any suggestions would be greatly appreciated

     

     

回答

  • 2008年3月17日 13:05brubberMVP, モデレータユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     回答済み
    サインインして投票
    1
    サインインして投票

    Probably you have a problem with the Volume Shadow Copy service. Please check if the service is installed and set to manual or automatic in services.msc

     

    If  the service is installed but for some reason not working properly you could try: (copied from http://blogs.technet.com/sdoakes/archive/2006/02/03/418722.aspx).

     

     

    in command shell do:

     

    Code Snippet

    Cd windows\system32

    Net stop vss

    Net stop swprv

    regsvr32 ole32.dll

    regsvr32 vss_ps.dll

    Vssvc /Register

    regsvr32 /i swprv.dll

    regsvr32 /i eventcls.dll

    regsvr32 es.dll

    regsvr32 stdprov.dll

    regsvr32 vssui.dll                           ##Possibly only applicable for Windows 2003##

    regsvr32 msxml.dll

    regsvr32 msxml3.dll

    regsvr32 msxml4.dll

     

     

    the last 3 depend on what XML versions you have installed.

    if you get error here, re-install corresponding XML version

    http://support.microsoft.com/kb/324460

     

    If some of the other required files are missing or corrupt you can COPY them from C:\WINDOWS\system32\dllcache

     

    It's also possible that some other backup software which has replaced the ms shadow copy provider, or stops it from working properly (for example Acronis True Image). If you have such software installed I think you can best contact the provider.

     

    Also the thread Re: Unable to create volume snapshot  may contain some relevant info for you.

     

すべての返信

  • 2008年3月17日 12:45Mike Sliger _MS_ ユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     
    サインインして投票
    0
    サインインして投票

    Check client's System event log for entries with source = VolSnap.  Is there more than one volume?  Backup acquires a snapshot on all configured volumes at the same time.  Each needs min. 300MB of free space.

     
  • 2008年3月17日 13:05brubberMVP, モデレータユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     回答済み
    サインインして投票
    1
    サインインして投票

    Probably you have a problem with the Volume Shadow Copy service. Please check if the service is installed and set to manual or automatic in services.msc

     

    If  the service is installed but for some reason not working properly you could try: (copied from http://blogs.technet.com/sdoakes/archive/2006/02/03/418722.aspx).

     

     

    in command shell do:

     

    Code Snippet

    Cd windows\system32

    Net stop vss

    Net stop swprv

    regsvr32 ole32.dll

    regsvr32 vss_ps.dll

    Vssvc /Register

    regsvr32 /i swprv.dll

    regsvr32 /i eventcls.dll

    regsvr32 es.dll

    regsvr32 stdprov.dll

    regsvr32 vssui.dll                           ##Possibly only applicable for Windows 2003##

    regsvr32 msxml.dll

    regsvr32 msxml3.dll

    regsvr32 msxml4.dll

     

     

    the last 3 depend on what XML versions you have installed.

    if you get error here, re-install corresponding XML version

    http://support.microsoft.com/kb/324460

     

    If some of the other required files are missing or corrupt you can COPY them from C:\WINDOWS\system32\dllcache

     

    It's also possible that some other backup software which has replaced the ms shadow copy provider, or stops it from working properly (for example Acronis True Image). If you have such software installed I think you can best contact the provider.

     

    Also the thread Re: Unable to create volume snapshot  may contain some relevant info for you.

     
  • 2008年3月20日 2:23Developer Retired ユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     
    サインインして投票
    1
    サインインして投票

    Brubber,

    Thanks, I ran the code snippit and it fixed my problem. Thanks again.

     

    Dick Eue

    dickeue@gmail.com

     
  • 2008年3月20日 2:57brubberMVP, モデレータユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     
    サインインして投票
    0
    サインインして投票

    OK, Glad it worked!

     
  • 2008年3月20日 3:52T. HeadrickMSFT, モデレータユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     
    サインインして投票
    0
    サインインして投票
    brubber - you ROCK !!!!!!!!!!!!!!!!!!!!!!

     

     
  • 2008年7月12日 10:50pauly tentoes ユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     
    サインインして投票
    0
    サインインして投票

    I had such high hopes that this would be my solution! Unfortunately, that's not the case.

     

    I have two XP Pro machines and an XP Home machine (a Gateway laptop); the Pros are fine, but I get the "volume shadow copy chkdsk /f/r" message repeatedly on the Home machine.

     

    Did "vssadmin list writers," and received no errors; checked services, and compared them against the services status in one of the functioning Pro machines. Nothing.

     

    Anyone else experiencing this error, still?

     

    --------------

     

    By the way: I have also:

    • uninstalled/reinstalled the connector software;
    • checked to make certain the shadow copy services were running at boot-up;
    • looked at the error messages, and the error code was 770 (IIRC; I don't have the laptop with me this morning)
    • made certain I had all the updates to my system
    • run chkdsk /f and chkdsk /f/r several times, with no errors
    • have 6 GB available space
    • increased virtual memory to twice the RAM

    Thanks for any other suggestions -- I'm ready to visit a Voodoo priestess at this point :-)

     

     

     
  • 2008年8月29日 12:14mwalters ユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     
    サインインして投票
    0
    サインインして投票
     

    Brubber,

    I was having this same problem on one of my XP machines, and ran the code snippit and it fixed my problem. What I don't understand is why it fixed my problem!

     
  • 2008年8月30日 4:30brubberMVP, モデレータユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     
    サインインして投票
    0
    サインインして投票
     mwalters wrote:
     

    Brubber,

    I was having this same problem on one of my XP machines, and ran the code snippit and it fixed my problem. What I don't understand is why it fixed my problem!

     

    Backup needs vss service to make volume snapshot. The commands just make sure all required dll's are there and properly registered so vss service can do it's job as required.

     
  • 2009年1月18日 21:17scywin ユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     
    サインインして投票
    0
    サインインして投票
    I have a Vista machine with this problem.  Other machines in the house are working fine.  I've tried every solution I've seen suggested on this or other threads to no avail, but with this one, when I tried entering the net stop commands I got a "System error 5 . . ."  and then "Access denied".

    I was signed on with an Administrator user id.

    This is not user friendly.  Until this is fixed I cannot recommend WHS to my friends and colleagues.



     
  • 2009年1月19日 4:49kariya21MVP, モデレータユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     
    サインインして投票
    0
    サインインして投票
    scywin said:

    I have a Vista machine with this problem.  Other machines in the house are working fine.  I've tried every solution I've seen suggested on this or other threads to no avail, but with this one, when I tried entering the net stop commands I got a "System error 5 . . ."  and then "Access denied".

    I was signed on with an Administrator user id.

    This is not user friendly.  Until this is fixed I cannot recommend WHS to my friends and colleagues.





    With all due respect, I don't see how it's WHS's fault.  All of the computers in your LAN work fine except for one.  It's clear the problem lies with your Vista box, not your WHS box.

    In any event, you should start your own thread and explain your problem with as much detail as possible if you want assistance with your issue.
     
  • 2009年8月23日 13:52marcoadriano ユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダルユーザーのメダル
     
    サインインして投票
    0
    サインインして投票
    Hi Brubber,
    Thanks for the snippet : It works!!!
    I've been leaning over my systems for about 10 days trying to find the solution with no results!  This link should be widely published as I have gone over many forums (+french forums as I am in France) looking for the solution and could not find it. I have re-installed, gone through all the services running on my systems, used troubleshooting plugins and followed their advise... and nothing!
    So believe me I am a happy and relieved man!!!
    Thanks again,
    Marco