locked
Printer problem, mirror image is printing

    질문

  •  

    When I print from a PC in my circle to a printer connected to my HUB PC it prints in mirror image. The PC I am printing from uses Vista, the HUB PC uses XP, any ideas on how to fix this?
    2007년 12월 30일 일요일 오후 6:51

답변

  • This sounds like a driver issue for the printer on the PC in your circle. On the sending PC, see if you can open the Printer properties for the shared printer and see if there is an option to mirror the output.

    You may want to contact support for help.

    How to reach support - http://forums.microsoft.com/WindowsOneCare/ShowPost.aspx?PostID=2421771&SiteID=2

    If it fails to validate your subscription, select the option that you are using a trial or beta copy and you can proceed to email support without validation once you've signed in.

    -steve
    2008년 1월 1일 화요일 오후 10:21

모든 응답

  • This sounds like a driver issue for the printer on the PC in your circle. On the sending PC, see if you can open the Printer properties for the shared printer and see if there is an option to mirror the output.

    You may want to contact support for help.

    How to reach support - http://forums.microsoft.com/WindowsOneCare/ShowPost.aspx?PostID=2421771&SiteID=2

    If it fails to validate your subscription, select the option that you are using a trial or beta copy and you can proceed to email support without validation once you've signed in.

    -steve
    2008년 1월 1일 화요일 오후 10:21
  • I have the same problem.  I have updated all drivers and tried the mirror image setting on both computers with no change in output.  As a short term fix, I have to print to a file and then print the document from the XP computer.  Still haven't found a true fix for it though.
    2008년 1월 31일 목요일 오전 6:43
  • What is the make and model of the printer? If the host PC (where the printer is attached) is XP, am I correct in assuming that the PC experiencing the problem is running Vista?

    And, I assume that the printer is being shared via OneCare?

    Have you contacted support per the link above?

    -steve

     

    2008년 1월 31일 목요일 오후 1:52
  • I am soooo frustrated!  I can't turn off "mirrow imaging" or "poster printing" when I print no matter what I do!  CAn anyone help!?

    2008년 10월 2일 목요일 오후 7:28
  •  Kristi Brunig wrote:

    I am soooo frustrated!  I can't turn off "mirrow imaging" or "poster printing" when I print no matter what I do!  CAn anyone help!?

    You're off topic for this forum, which is dedicated to Windows Live OneCare. You may want to try the Microsoft Public newsgroups here: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx or the manufacturer of your printer's web site.

    -steve

    2008년 10월 6일 월요일 오후 7:26
  • Awesome ...! It works. Thanks a lot.  The option to mirror the output was on. 

    Best regards,
    Volzhina
    2009년 5월 26일 화요일 오후 11:15
  • Thank you so much.  I don't know how that printer setting got switched, but it must have to do with me trying to network my Vista PC.  I've used PC's since 1983.  I got one of the first one's.  But Vista is going to drive me to Mac.
    • 답변으로 제안됨 Amr El-Baz 2010년 4월 10일 토요일 오전 9:21
    2009년 9월 17일 목요일 오전 4:47