로그인
Microsoft.com
 
Microsoft
 
 
 
Microsoft >
> 
> 
Failing to add a preconfigured compute node to a cluster

回答済み Failing to add a preconfigured compute node to a cluster

  • 2011년 10월 26일 수요일 오후 4:37
     
     
    로그인하여 투표
    0

    Hi,

    I'm trying to add a preconfigured compute node to a cluster. Each box in the cluster have a single network card with a single IP so all nodes are in the 'enterprise network'. After I complete 'Add Node Wizard' I see that node is added with status Offline and with the following errors (the same errors I see when I try to apply a template to that newly created node):

    10/26/2011 8:22:52 PM    Failed to execute the change on the target node
    10/26/2011 8:22:52 PM    Could not contact node 'WIN-HPC2' to perform change. The management service was unable to connect to the node using any of the ip addresses resolved for the node.
    System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
       at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)
       at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)
       at System.Security.Principal.WindowsIdentity.GetName()
       at System.Security.Principal.WindowsIdentity.get_Name()
       at Microsoft.SystemDefinitionModel.SdmServerChannel.ChannelAuth.IsConnectingIdentityAuthorized(IIdentity identity)
       at System.Runtime.Remoting.Channels.Tcp.TcpServerChannel.AcceptSocketCallback(IAsyncResult ar)
    10/26/2011 8:22:51 PM    Checking the configuration of compute node HPC\WIN-HPC2.
    10/26/2011 8:22:51 PM    Associating template Default ComputeNode Template with compute node HPC\WIN-HPC2
    10/26/2011 8:22:51 PM    Moving node HPC\WIN-HPC2 from state Unknown to state Provisioning.
    10/26/2011 8:22:51 PM    Assigning template Default ComputeNode Template to node WIN-HPC2.

    How is it to troubleshoot that: logs, etc.? what is exactly going wrong? All diagnostics tests went ok. Event logs says nothing. I can ping the host, etc.

    Any ideas?

    thanks.

    Andrei.

    • 편집됨 zandr 2011년 10월 26일 수요일 오후 6:17
    •  
     

모든 응답

  • 2011년 10월 27일 목요일 오전 11:04
     
     
    로그인하여 투표
    0

    Hi,

    Try to turn off firewall and check that all hpc services is started on 'WIN-HPC2'. Also you can check that head node resolves win-hpc2 ip correctly.

     

    Please, don't forget to vote as helpful and mark as answered if the answer helped to solve your problem
    • 편집됨 SergiiKorin 2011년 10월 27일 목요일 오전 11:07
    •  
     
  • 2011년 10월 27일 목요일 오전 11:45
     
     답변됨
    로그인하여 투표
    0

    The same situation and the same workaround: http://social.microsoft.com/Forums/en-US/windowshpcitpros/thread/c8d5678e-056b-4ddb-aff6-fa863f9ebc84/

    Boxes were actually a VMWare cloned machines. When I created computed node from the ground up, not by wmware clone, then all went ok.

    The only question is about troubleshooting mechanism: is there any detailed log information, not just the stuff I provided in the initial post, which is quite non-informative?

    Andrei.



    • 답변으로 표시됨 zandr 2011년 10월 27일 목요일 오전 11:46
    • 편집됨 zandr 2011년 10월 27일 목요일 오전 11:50
    •  
     
  • 2011년 10월 27일 목요일 오후 2:42
     
     답변됨
    로그인하여 투표
    1

    I understood, the problem appears becouse a system is cloned. And as result, two or more systems have the same GUID.

    You need to do sysprep with Generalize selected on every cloned system. After that cloned system will restart and you will need to join it into domain again (Dont forget to delete its computer account on AD previously). When you will add it on cluster a problem will disappear.


    Hope this will help you

    Please, don't forget to vote as helpful and mark as answered if the answer helped to solve your problem
    • 답변으로 제안됨 SergiiKorin 2011년 10월 27일 목요일 오후 2:42
    • 답변으로 표시됨 zandr 2011년 10월 28일 금요일 오전 8:47
    •  
     
  • 2011년 10월 28일 금요일 오전 11:59
     
     
    로그인하여 투표
    0

    Thanks a lot. I just cloned a new vm and after appliance of sysprep with Generalize feature turned on, everything went perfectly.

    Regards,

    Andrei.