Outside Pc-communicator-- -- Router/External DNS-------------- Edgeserver--- switch--- Front end server, DC-Internal DNS, EXchange,InsidePCCommunicator. 192.168.156.1---- ----------192.168.156.4/192.168.155.6-----192.168.152.26----------192.168.152.23, 192.168.152.21
edge server details LAN 1 = 192.168.152.26 ,no Gateway , Dns =192.168.152.1 (internal dns server) Access edge = 192.168.155.1 , gateway = 192.168.155.6 , dns = 192.168.155.6 Web confrence= 192.168.155.2, no gateway , dns = 192.168.155.6 A/v = 192.168.155.3, no gateway , dns = 192.168.155.6
from outsdie office communicator i can logon and i can do chat and presence. but i can not able to establish voice call . from outside when i call it is ringing but once i pick up call after few seconds it says call was disconnected .
In outside pc communicator -event log - event id : 11 source - communicator - " MS-CLIENT-diagnositcs: 52031; reason="Call terminated on media connectivity failure "
In front end server- when i run the validation- i get error message like [0xC3FC200D] One or more errors were detected
Connecting to A/V Authentication Edge Server to get credentials A/V Authentication Edge Server: Could not contact A/V Authentication Edge Server. To resolve this error, check for the following 1. The outbound proxy is reachable. 2. The outbound proxy and A/V Authentication Edge Server are in trusted server list of each other. 3. The outbound proxy and A/V Authentication Edge Server have valid certificates. 4. Conference Server certificate is valid. 5. A/V Authentication Edge Server Gruu is correct. Failure [0xC3FC200D] One or more errors were detected
front end server configuration: In front end server - pool properties - av authentication servvice - edgeser (edge server computer name); port = 5062 . Encryption level : do no support encryption.
hi thorsten s4 and sip staack is too big so, i am going to pase only failure log. feroz (outside pc) is calling to ft ( inside user), regarding ip address please look in to above table
The edge Server is added in work group. so the FQDN for internal interface is : edgesrv. i have generated certificate with this name only. edge server internal interface settings
IP Address: 192.168.152.26 DNS Name: edgesrv Next Hop Address: fesrv.ocsr2.kin.com Next Hop Port: 5061
this is the lab envoirenment so, i have open all ports and i do not have a firewall , only router i have which does routing to connect external client to access edge server. i have a question is why do we need to connect av edge server to internet, because in outside pc communicator we just configure access edge server FQDN name: sip.ocsr2.kin.com:443, how MOC will contact av server. ? please explain ?
Dear all . now it is working there is some problem with subject name while creating the certificate. i will explain in details tomorrow.. Now i need to implement in live enivorenement.
hi all it was a problem with A/V edge server authentication issue. for that i have specified the certificate with the name of av.ocsr2.kin.com, this is wrong.. then i changed to edgesrv.ocsr2.kin.com (because this internal a/v edge server and for external a/v edge server interface we do not need a certificate.)
I need some help , can you help me please. the problem is I am going to map my Access edge server and a/v edge server with one public ip address like:
(192.168.155.1 )access edge server : 443 ---- 200.10.10.1 : 1253 | dns mapping will be = sip.ocsr2.kin.com = 200.10.10.1 |outside pc communicator = sip.ocsr2.kin.com:1253
(192.168.155.3) a/v edge server :445 ------- 200.10.10.1 : 1254 | dns maping will be = av.ocsr2.kin.com = 200.10.10.1
in the above table due to the security reasons i have not mention the actual domain name and the PUBLIC IP Address and this setup i am doing in the test lab and i have only one public ip address and i am mapping with different port numbers .
OCS Edge Server - Communicator voice call not working from Outsdie: 0xC3FC200D
