hwveri tool is not working with i7-3770 and ASUS P8H67-M PRO
-
2012年7月23日 5:20
Hi,
We recently bought new PC for SORA, and installed XP SP3 eng, WINDDK, PCIe driver and hwtest driver.
(FYI - USRP daughterboard: XCVR2450 rev. 1232)
After that, I executed hwveri.exe to test send/receive test, but failed.
According to the below message, I disabled and re-enabled the hwtest driver (+PCIe driver also)
but of no use.
Several times of reboot & try also didn't give any change.
Here is the out messages when I tried sine/send test:
Load radio configuration from D:\SoraSDK1.6\bin\SavedConfig.ini. freqOffset 0 txgain 0xf00 rxgain 0x2000 rxpa 0x1000 centralFreq 2422 sampleRate 40 freqOffsetLineSlope -0.894000 freqOffsetLineIntercept 0.000000 SoraUInitUserExtension called success SoraURadioStart called success SoraURadioSetFreqOffset called. freqOffset set to 0 success SoraURadioSetTxGain called. txgain set to 0xf00 success SoraURadioSetRxGain called. rxgain set to 0x2000 success SoraURadioSetRxPA called. rxpa set to 0x1000 success SoraURadioSetCentralFreq called. centralFreq set to 2422000 success SoraURadioMapTxSampleBuf called success SoraURadioTransfer called. SampleSize = 1048576 Failed. ret = 80050003 SoraURadioUnmapTxSampleBuf called success SoraUCleanUserExtension called
And this is the output of sine/receive test:
Load radio configuration from D:\SoraSDK1.6\bin\SavedConfig.ini. freqOffset 0 txgain 0xf00 rxgain 0x2000 rxpa 0x1000 centralFreq 2422 sampleRate 40 freqOffsetLineSlope -0.894000 freqOffsetLineIntercept 0.000000 SoraUInitUserExtension called success SoraURadioStart called success SoraURadioSetFreqOffset called. freqOffset set to 0 success SoraURadioSetTxGain called. txgain set to 0xf00 success SoraURadioSetRxGain called. rxgain set to 0x2000 success SoraURadioSetRxPA called. rxpa set to 0x1000 success SoraURadioSetCentralFreq called. centralFreq set to 2422000 success SoraURadioMapRxSampleBuf called success SoraURadioAllocRxStream called success Start receiving signal... SoraRadioGetRxStreamPos called SoraGetStreamVStreamMask called SoraCheckSignalBlock called SoraCheckSignalBlock timeout. Please disable and enable HwTest driver to solve the problem. End receiving signal. SoraURadioReleaseRxStream called SoraURadioUnmapRxSampleBuf called success SoraUCleanUserExtension called
SNR/send test:
Load radio configuration from D:\SoraSDK1.6\bin\SavedConfig.ini. freqOffset 0 txgain 0xf00 rxgain 0x2000 rxpa 0x1000 centralFreq 2422 sampleRate 40 freqOffsetLineSlope -0.894000 freqOffsetLineIntercept 0.000000 SoraUInitUserExtension called success SoraURadioStart called success SoraURadioSetFreqOffset called. freqOffset set to 0 success SoraURadioSetTxGain called. txgain set to 0xf00 success SoraURadioSetRxGain called. rxgain set to 0x2000 success SoraURadioSetRxPA called. rxpa set to 0x1000 success SoraURadioSetCentralFreq called. centralFreq set to 2422000 success SoraURadioMapTxSampleBuf called success SoraURadioTransfer called. SampleSize = 7424 Failed. ret = 80050003 SoraURadioUnmapTxSampleBuf called success SoraUCleanUserExtension called
SNR/receive test:
Load radio configuration from D:\SoraSDK1.6\bin\SavedConfig.ini. freqOffset 0 txgain 0xf00 rxgain 0x2000 rxpa 0x1000 centralFreq 2422 sampleRate 40 freqOffsetLineSlope -0.894000 freqOffsetLineIntercept 0.000000 SoraUInitUserExtension called success SoraURadioStart called success SoraURadioSetFreqOffset called. freqOffset set to 0 success SoraURadioSetTxGain called. txgain set to 0xf00 success SoraURadioSetRxGain called. rxgain set to 0x2000 success SoraURadioSetRxPA called. rxpa set to 0x1000 success SoraURadioSetCentralFreq called. centralFreq set to 2422000 success SoraURadioMapRxSampleBuf called success SoraURadioAllocRxStream called success Start receiving signal... SoraRadioGetRxStreamPos called SoraGetStreamVStreamMask called SoraCheckSignalBlock called SoraCheckSignalBlock timeout. Please disable and enable HwTest driver to solve the problem. End receiving signal. SoraURadioReleaseRxStream called SoraURadioUnmapRxSampleBuf called success SoraUCleanUserExtension called
And I don't know what causes this problem.
It will be very thankful to help me with this.
Thank you.
Jihoon Seo
- 已编辑 Jihoon Seo 2012年10月9日 4:59
全部回复
-
2012年8月2日 7:54版主
Hi Jihoon,
The information shows the transfer procedure fails. Fortunately, we have just bought this ASUS motherboard. I will try it and back to you soon later.
-Jiansong
-
2012年8月3日 7:10
Thank you for answering.
FYI, I first used Intel HD4000 (CPU+Mainboard graphic, so only SORA board is at one of 2 PCI-E slots), but failed.
Next, we installed Nvidia GeForce 210 at first PCI-E slot and SORA board at second PCI-E slot, but failed too.
-
2012年8月10日 4:27版主
I guess the problem may be on your hardware board, could you check the states of the LEDs?
You can also get help from Sora hardware OEM vendor.
-Jiansong
- 已编辑 Jiansong zhangMicrosoft Employee, Moderator 2012年8月10日 6:17
-
2012年8月14日 8:33
I took a photo of SORA board.
https://docs.google.com/open?id=0B_iqvW5XZhkyWVhqcE83RzlSY3M
In [V5 USER IO] section located in upper-right corner, only [D1] LED is on.
And, it will be grateful to let me know how to find the contact info of SORA vendor?
I tried googling but couldn't find it.
Thank you.
-
2012年8月26日 19:44版主
Dear Jihoon,
Sorry for the late reply because I was in a trip during last two weeks.
If only D1 is on, the hardware is not in a correct state.
To reach Sora's heardware vendor, you can email yaoyuan@v3best.com.
-Jiansong
- 已标记为答案 Jiansong zhangMicrosoft Employee, Moderator 2012年9月5日 4:20
-
2012年8月29日 3:34
I sent an e-mail to HW vendor thanks to you.
Thank you!
