locked
How to move computer between subnets? RRS feed

  • Question

  • How to move a computer from subnet 192.168.1.0/24  to subnet 192.168.3.0/24 please tell me the detailed steps to perform this task. Thank you very much in advance.
    Wednesday, October 11, 2017 5:17 PM

Answers

  • Hi,

    I'm wondering if you are talking about IP address, instead of Subnet mask.

    If this is correct, you can use "netsh" command.
    1. run cmd.exe with administrator privilege.
    2. type (replace xxx with your network adapter. you can see the name by IPCONFIG).
    netsh interface ip set address "xxx" static 192.168.3.0

    or you can change via GUI (already you know).


    Regards,

    Ashidacchi

    • Marked as answer by Sunny Huw Friday, October 13, 2017 6:41 PM
    Wednesday, October 11, 2017 11:52 PM

All replies

  • Hi,

    I'm wondering if you are talking about IP address, instead of Subnet mask.

    If this is correct, you can use "netsh" command.
    1. run cmd.exe with administrator privilege.
    2. type (replace xxx with your network adapter. you can see the name by IPCONFIG).
    netsh interface ip set address "xxx" static 192.168.3.0

    or you can change via GUI (already you know).


    Regards,

    Ashidacchi

    • Marked as answer by Sunny Huw Friday, October 13, 2017 6:41 PM
    Wednesday, October 11, 2017 11:52 PM
  • 不太会英文,给你中文的答案不知能用上否。

    第一、路由模式,在路由器上更改DHCP,clent pc auto from dhcp。

    第二、多子网模式,你现在在192.168.1子网,根据设备的设置看是否需要跳到192.168.3的设备组上,然后依楼上的方法,设置自己的IP或用DHCP。

    Thursday, October 12, 2017 12:09 AM
  • Thank you very much!
    Friday, October 13, 2017 6:41 PM
  • Thank you very much!
    Friday, October 13, 2017 6:41 PM