locked
A/V Edge with Cisco Pix 515e RRS feed

  • Question

  •  

    Hi Everyone,

     

    I am stuck and could use a little help. I am trying to get my A/V edge server working and I know it requires a public IP. I have my A/V edge server in my DMZ behind a Cisco PIX 515e and I am NOT a cisco guy and am struggling with how to get my A/V edge with a public IP to be reachable from the net. I have tried the nat (DMZ) 0 public IP and that does nothing for me. I am sorry if I am short on the details but not sure what else someone would be looking for.

     

    Thanks for any help!!

    Thursday, February 21, 2008 8:40 PM

All replies

  • We are struggling with the same problem. And I think we have some problems with the PIX config conserning the IP for the edge server.

    This is what I have done on the PIX: static (inside, outside) public_a\v_ip public_a\v_ip 255.255.255.255

    But this not seems to solve our problem. Did you get your's to work?

     

    Reili

     

    Monday, March 31, 2008 11:54 AM
  •  

    HI Reili_q

     

    I was not able to do it I have a IOS that won't do what we are trying to do. The easiest way to do is to either use IOS 7.0 in transparent mode or do what I did and put the A/V outside of the firewall.

    Monday, March 31, 2008 4:10 PM