Error "0xC3FC200D" When trying validate front end config - any ideas please? RRS feed

  • Question

  • Hi All,

    We are getting very close (I hope) to completeing our test environ of OCS 2007 R2 but when trying to validate we get the following errors:

    DNS Resolution succeeded: 10.X.X.X
    TLS connect failed: 10.X.X.X:5061 Error Code: 0x274d No connection could be made because the target machine actively refused it 10.X.X.X:5061
    Suggested Resolution: Make sure that the server is listening on the specified IP address/Port/Transport. If you have a firewall make sure that this port is open. Make sure that the server is running. If this is an Edge Server, ensure that remote user access has been enabled. This can be ignored if you have not enabled the transport on the target server.
    Suggested Resolution: Ensure that the DNS records have been setup correctly. If this server is an Access Edge Server, make sure outside user access is enabled.

    The firewall is disabled on the IP its trying to connect to (Back End) and its not an edge server. DNS resolves from the front end - so we're kinda stuck.

    Any ideas - thanks


    Tuesday, April 14, 2009 10:23 AM