locked
WLBS Error #35 (Does it matter?) RRS feed

  • Question

  • Hi, I get this error message everytime when rebooting my WHS.  I've web searched and I'm still not sure if it matters.  Any advice?
    Thanks
    Nathan
    =======================

    Event Type: Error
    Event Source: WLBS
    Event Category: None
    Event ID: 35
    Date:  8/03/2009
    Time:  8:43:49 AM
    User:  N/A
    Computer: SERVER
    Description:
    NLB Cluster 0.0.0.0 : Cluster mode cannot be enabled due to parameter errors.  All traffic will be passed through to TCP/IP.  Restart cluster operations after fixing the problem by running 'wlbs reload' followed by 'wlbs start'.  

    Saturday, March 7, 2009 10:12 PM

Answers

  • jmone said:

    Hi, I get this error message everytime when rebooting my WHS.  I've web searched and I'm still not sure if it matters.  Any advice?
    Thanks
    Nathan
    =======================

    Event Type: Error
    Event Source: WLBS
    Event Category: None
    Event ID: 35
    Date:  8/03/2009
    Time:  8:43:49 AM
    User:  N/A
    Computer: SERVER
    Description:
    NLB Cluster 0.0.0.0 : Cluster mode cannot be enabled due to parameter errors.  All traffic will be passed through to TCP/IP.  Restart cluster operations after fixing the problem by running 'wlbs reload' followed by 'wlbs start'.  



    That is for Windows Load Balancing Service, which shoudn't even be running.  When you first setup WHS, did you have any problems installing?

    If your server continues to function properly with that error message, I would recommend leaving well enough alone. :)  However, there is a KB article for stopping/disabling WLBS, but it's pretty technical (and it also requires logging into the server desktop, which is unsupported) so attempt it at your own risk. 
    • Edited by kariya21Moderator Sunday, March 8, 2009 3:50 PM added hyperlink
    • Marked as answer by jmone Sunday, March 8, 2009 7:38 PM
    Sunday, March 8, 2009 3:49 PM
    Moderator

All replies

  • jmone said:

    Hi, I get this error message everytime when rebooting my WHS.  I've web searched and I'm still not sure if it matters.  Any advice?
    Thanks
    Nathan
    =======================

    Event Type: Error
    Event Source: WLBS
    Event Category: None
    Event ID: 35
    Date:  8/03/2009
    Time:  8:43:49 AM
    User:  N/A
    Computer: SERVER
    Description:
    NLB Cluster 0.0.0.0 : Cluster mode cannot be enabled due to parameter errors.  All traffic will be passed through to TCP/IP.  Restart cluster operations after fixing the problem by running 'wlbs reload' followed by 'wlbs start'.  



    That is for Windows Load Balancing Service, which shoudn't even be running.  When you first setup WHS, did you have any problems installing?

    If your server continues to function properly with that error message, I would recommend leaving well enough alone. :)  However, there is a KB article for stopping/disabling WLBS, but it's pretty technical (and it also requires logging into the server desktop, which is unsupported) so attempt it at your own risk. 
    • Edited by kariya21Moderator Sunday, March 8, 2009 3:50 PM added hyperlink
    • Marked as answer by jmone Sunday, March 8, 2009 7:38 PM
    Sunday, March 8, 2009 3:49 PM
    Moderator
  • Thanks kariya - I purchased a prebuilt box (Tranquil) so I can ask them on a support ticket.  Thanks for the KB article and I can see why "Network Clustering" is not part of the target market for WHS - no idea why it is trying to load but since I don't think? it is giving me any problems I'll happly take your advice and leave well enough alone.
    Sunday, March 8, 2009 7:38 PM