locked
confmsp.dll install problem and rebooting itself RRS feed

  • Question

  • I am very please and excited that MS are releasing this WHS software. Good move guys. I have a problem however with the RC1 install.

    During install WHS reaches a point where it tries to install a file named confmsp.dll (which is on the DVD btw but with a dl_ extension) but it just refuses to copy the file.

    The options are retry, skip or exit so I did a skip. Every other file appears to have installed correctly at this stage. After a few other hiccups and reboots and stuff, I shut the system down and restart and from then on it only gets a few seconds into the startup sequence and reboots itself, presumably ad infinitum.

    Prior to this I have been able to access the start button, add user accounts and folders, run a command prompt and so on all quite happily.

    The PC has 1GB RAM and is a HP d530 slimline with 320GB SATA HDD.

    WHS does not detect my network card either btw.

    This machine runs Vista fine so I don't expect any hardware problems.

    The DVD drive in the machine is the same one as I used to burn the DVD.

    Any thoughts please?
    Saturday, June 16, 2007 2:06 AM

Answers

  • Here is some more info...

    The dll it fails to copy is 22% of the way thru the DOS screen part of the install.

    Following this it does a checkdisk and reboots yet again.

    A while later it fails on "Updating windows redirector update redirector". This has error code 0x800707eb. The log file follows...

    After this, I close the log file and can access the start button and stuff. Rebooting manually now continues the install that eventually leads to inability to reboot. 



    [6/16/2007 3:22:05 PM  828] Trying to load c:\install\winntbbu.dll
    [6/16/2007 3:22:06 PM  890] Installer initialized with parameters -continue
    [6/16/2007 3:22:06 PM  890] Current product version 6.0.1424.2
    [6/16/2007 3:22:06 PM  890] Setup has [re]started at mode 3 stage 1 step 0
    [TRACE] Looking for template x:\files
    [TRACE] Checked file C:\files, error 2
    [TRACE] Checked file D:\files, error 2
    [6/16/2007 3:22:06 PM  890] Found file E:\files
    [6/16/2007 3:22:06 PM  890] Found WHS on drive E
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\files
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\WHS
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\REDISTR
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003\I386\pidgen.dll
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\files\DOCS\eula.txt
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003\I386\privstmt.rtf
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003\i386\winntbbu.dll
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003\I386\TXTSETUP.SIF
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003\I386\intl.inf
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\TESTS\dbg_x86.msi
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\TESTS\coverage\magellan.msi
    [6/16/2007 3:22:06 PM  890] Found system on drive C
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\WHS
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\redistr
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\DOCS
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\$OEM$
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\windows\system32\pidgen.dll
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install\winntbbu.dll
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install\q-1024x768_24bit.bmp
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install\qs.ini
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install\winnt.sif
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install\dcpromo.ini
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file E:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file E:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:06 PM  890] Install step is set to 5
    [6/16/2007 3:22:06 PM  890] Install step is set to 5
    [6/16/2007 3:22:06 PM  890] First boot in Windows
     Windows Home Server setup will now configure networking and
    convert system drive to dynamic.

    [6/16/2007 3:22:06 PM  890] CD Autorun OFF
    [6/16/2007 3:22:06 PM  890] Current BitsPerPixel 32.
    [6/16/2007 3:22:06 PM  890] Current PelsWidth 1024.
    [6/16/2007 3:22:06 PM  890] Current PelsHeight 768.
    [6/16/2007 3:22:07 PM  890] Screen resolution changed to 1024 x 768 x 32.
    [6/16/2007 3:22:07 PM  890] Advancing to stage 1 step 1
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file E:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file E:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:07 PM  890] Install step is set to 5
    [6/16/2007 3:22:07 PM  890] Mounting the cdrom
    [TRACE] Looking for template E:\files
    [TRACE] Checked file C:\files, error 2
    [TRACE] Checked file D:\files, error 2
    [6/16/2007 3:22:07 PM  890] Found file E:\files
    [6/16/2007 3:22:07 PM  890] Found WHS on drive E. Looking for volume ID.
    [6/16/2007 3:22:09 PM  890] Dismounting E:\
    [6/16/2007 3:22:09 PM  890] Successfully mounted x:\
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 1 step 2
    [TRACE] Looking for template E:\files
    [TRACE] Checked file C:\files, error 2
    [TRACE] Checked file D:\files, error 2
    [6/16/2007 3:22:09 PM  890] Found file X:\files
    [6/16/2007 3:22:09 PM  890] Found WHS on drive X
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\files
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\WHS
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\REDISTR
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003\I386\pidgen.dll
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\files\DOCS\eula.txt
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003\I386\privstmt.rtf
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003\i386\winntbbu.dll
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003\I386\TXTSETUP.SIF
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003\I386\intl.inf
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\TESTS\dbg_x86.msi
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\TESTS\coverage\magellan.msi
    [6/16/2007 3:22:09 PM  890] Found system on drive C
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\WHS
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\redistr
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\DOCS
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\$OEM$
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\windows\system32\pidgen.dll
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install\winntbbu.dll
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install\q-1024x768_24bit.bmp
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install\qs.ini
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install\winnt.sif
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install\dcpromo.ini
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Continuing to configure storage
    [6/16/2007 3:22:09 PM  890] First available drive letter is I
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 1 step 3
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Continuing to configure storage
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 1 step 4
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Installing the debugger
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 1 step 5
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Disabling SIS filter
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 1 step 6
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Configuring to fix MFT $Upcase table on next reboot
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 2 step 0
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Converting the volume to dynamic
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 2 step 1
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Converting the volume to dynamic
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 2 step 2
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Converting the volume to dynamic
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 3 step 0
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Advancing to stage 4 step 0
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Configuring the network
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] IP address is NOT configured in qs.ini. Dynamic IP address will be used.
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 5 step 0
    [6/16/2007 3:22:09 PM  890] Rebooting the OS
    [6/16/2007 3:22:09 PM  890] Progress: 0%
    [6/16/2007 3:22:09 PM  890] The system will reboot in 10 seconds...
    [6/16/2007 3:22:10 PM  890] Progress: 10%
    [6/16/2007 3:22:10 PM  890] The system will reboot in 9 seconds...
    [6/16/2007 3:22:11 PM  890] Progress: 20%
    [6/16/2007 3:22:11 PM  890] The system will reboot in 8 seconds...
    [6/16/2007 3:22:12 PM  890] Progress: 30%
    [6/16/2007 3:22:12 PM  890] The system will reboot in 7 seconds...
    [6/16/2007 3:22:13 PM  890] Progress: 40%
    [6/16/2007 3:22:13 PM  890] The system will reboot in 6 seconds...
    [6/16/2007 3:22:14 PM  890] Progress: 50%
    [6/16/2007 3:22:14 PM  890] The system will reboot in 5 seconds...
    [6/16/2007 3:22:15 PM  890] Progress: 60%
    [6/16/2007 3:22:15 PM  890] The system will reboot in 4 seconds...
    [6/16/2007 3:22:16 PM  890] Progress: 70%
    [6/16/2007 3:22:16 PM  890] The system will reboot in 3 seconds...
    [6/16/2007 3:22:17 PM  890] Progress: 80%
    [6/16/2007 3:22:17 PM  890] The system will reboot in 2 seconds...
    [6/16/2007 3:22:18 PM  890] Progress: 90%
    [6/16/2007 3:22:18 PM  890] The system will reboot in 1 seconds...
    [6/16/2007 3:24:49 PM  6f0] Trying to load c:\install\winntbbu.dll
    [6/16/2007 3:24:50 PM  700] Installer initialized with parameters -continue
    [6/16/2007 3:24:50 PM  700] Current product version 6.0.1424.2
    [6/16/2007 3:24:50 PM  700] Setup has [re]started at mode 3 stage 5 step 0
    [TRACE] Looking for template x:\files
    [TRACE] Checked file C:\files, error 2
    [TRACE] Checked file I:\files, error 2
    [6/16/2007 3:24:50 PM  700] Found file X:\files
    [6/16/2007 3:24:50 PM  700] Found WHS on drive X
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\files
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\WHS
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\REDISTR
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003\I386\pidgen.dll
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\files\DOCS\eula.txt
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003\I386\privstmt.rtf
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003\i386\winntbbu.dll
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003\I386\TXTSETUP.SIF
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003\I386\intl.inf
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\TESTS\dbg_x86.msi
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\TESTS\coverage\magellan.msi
    [6/16/2007 3:24:50 PM  700] Found system on drive C
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\WHS
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\redistr
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\DOCS
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\$OEM$
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\windows\system32\pidgen.dll
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install\winntbbu.dll
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install\q-1024x768_24bit.bmp
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install\qs.ini
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install\winnt.sif
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install\dcpromo.ini
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:24:50 PM  700] Install step is set to 5
    [6/16/2007 3:24:50 PM  700] Updating Windows Update Redirector
    [6/16/2007 3:24:50 PM  700] Spawning process [C:\redistr\WindowsUpdateAgent30-x86.exe /quiet /norestart]
    [6/16/2007 3:25:00 PM  700] ERROR: Process failed (with return code 3010)
    [6/16/2007 3:25:00 PM  700] Process returned the following message:

    [TRACE] ExecCmd : Exited (0x800703eb)
    [TRACE] Step_UpdateWURedir : Exited (0x800703eb)
    [6/16/2007 3:25:00 PM  700] Updating Windows Update Redirector failed. Error 0x800703eb.
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:25:00 PM  700] MessageBox: Updating Windows Update Redirector failed: Cannot complete this function.

     (error code 0x800703eb).
    [6/16/2007 3:25:52 PM  700] Windows Home Server setup failed. The error code is 0x800703eb. Please correct the problem and reboot to restart the setup program.
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:25:52 PM  700] MessageBox: Windows Home Server installation failed. Do you want to view the installation log file?
    [6/16/2007 3:26:10 PM  700] Spawning process [notepad.exe "C:\Documents and Settings\All Users\Application Data\Microsoft\Windows Home Server\logs\q_setup.log"]

    Saturday, June 16, 2007 3:33 AM
  • Update on the problem and a possible solution...


    Fascinating problem. Yesterday I copied the iso from my laptop to a backup ext usb hdd and then to the vista pc with dvd burner.

     

    The crc32 check showed the laptop version from MS was ok but the version on the ext hdd was different. Today I copied it across to the ext hdd 6 times and every checksum was different.

     

    Now copied the good one directly from laptop -> WHS via connect software and checksum is ok. Burning a new dvd now.

     

    This is a real eye opened re reliability (or something). What do u think the problem would be? Bad hdd surface? Usb? Dodgy usb interface hardware?

     

    Trying a new re-install again now.


    My suggestion is to do the checksum thing as I have wasted almost a day and you probably don't want to do the same :-(

    Saturday, June 16, 2007 6:24 AM
  • Looks like copying the iso from the laptop -> ext hdd -> dvd burning pc was flawed at the move-to-ext-hdd stage.

    The install has been flawless so far and it is nearing completion.

    Ouch, this has been an interesting experience. Moral of the story would be to check the iso checksum ON THE PC you are doing the dvd burning on.

    Rebooting now......

    Working!!!
    Saturday, June 16, 2007 7:27 AM

All replies

  • Here is some more info...

    The dll it fails to copy is 22% of the way thru the DOS screen part of the install.

    Following this it does a checkdisk and reboots yet again.

    A while later it fails on "Updating windows redirector update redirector". This has error code 0x800707eb. The log file follows...

    After this, I close the log file and can access the start button and stuff. Rebooting manually now continues the install that eventually leads to inability to reboot. 



    [6/16/2007 3:22:05 PM  828] Trying to load c:\install\winntbbu.dll
    [6/16/2007 3:22:06 PM  890] Installer initialized with parameters -continue
    [6/16/2007 3:22:06 PM  890] Current product version 6.0.1424.2
    [6/16/2007 3:22:06 PM  890] Setup has [re]started at mode 3 stage 1 step 0
    [TRACE] Looking for template x:\files
    [TRACE] Checked file C:\files, error 2
    [TRACE] Checked file D:\files, error 2
    [6/16/2007 3:22:06 PM  890] Found file E:\files
    [6/16/2007 3:22:06 PM  890] Found WHS on drive E
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\files
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\WHS
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\REDISTR
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003\I386\pidgen.dll
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\files\DOCS\eula.txt
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003\I386\privstmt.rtf
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003\i386\winntbbu.dll
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003\I386\TXTSETUP.SIF
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\SVR_2003\I386\intl.inf
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\TESTS\dbg_x86.msi
    [6/16/2007 3:22:06 PM  890] Fixing up path E:\TESTS\coverage\magellan.msi
    [6/16/2007 3:22:06 PM  890] Found system on drive C
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\WHS
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\redistr
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\DOCS
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\$OEM$
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\windows\system32\pidgen.dll
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install\winntbbu.dll
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install\q-1024x768_24bit.bmp
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install\qs.ini
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install\winnt.sif
    [6/16/2007 3:22:06 PM  890] Fixing up path C:\install\dcpromo.ini
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file E:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file E:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:06 PM  890] Install step is set to 5
    [6/16/2007 3:22:06 PM  890] Install step is set to 5
    [6/16/2007 3:22:06 PM  890] First boot in Windows
     Windows Home Server setup will now configure networking and
    convert system drive to dynamic.

    [6/16/2007 3:22:06 PM  890] CD Autorun OFF
    [6/16/2007 3:22:06 PM  890] Current BitsPerPixel 32.
    [6/16/2007 3:22:06 PM  890] Current PelsWidth 1024.
    [6/16/2007 3:22:06 PM  890] Current PelsHeight 768.
    [6/16/2007 3:22:07 PM  890] Screen resolution changed to 1024 x 768 x 32.
    [6/16/2007 3:22:07 PM  890] Advancing to stage 1 step 1
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file E:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file E:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:07 PM  890] Install step is set to 5
    [6/16/2007 3:22:07 PM  890] Mounting the cdrom
    [TRACE] Looking for template E:\files
    [TRACE] Checked file C:\files, error 2
    [TRACE] Checked file D:\files, error 2
    [6/16/2007 3:22:07 PM  890] Found file E:\files
    [6/16/2007 3:22:07 PM  890] Found WHS on drive E. Looking for volume ID.
    [6/16/2007 3:22:09 PM  890] Dismounting E:\
    [6/16/2007 3:22:09 PM  890] Successfully mounted x:\
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 1 step 2
    [TRACE] Looking for template E:\files
    [TRACE] Checked file C:\files, error 2
    [TRACE] Checked file D:\files, error 2
    [6/16/2007 3:22:09 PM  890] Found file X:\files
    [6/16/2007 3:22:09 PM  890] Found WHS on drive X
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\files
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\WHS
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\REDISTR
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003\I386\pidgen.dll
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\files\DOCS\eula.txt
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003\I386\privstmt.rtf
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003\i386\winntbbu.dll
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003\I386\TXTSETUP.SIF
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\SVR_2003\I386\intl.inf
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\TESTS\dbg_x86.msi
    [6/16/2007 3:22:09 PM  890] Fixing up path X:\TESTS\coverage\magellan.msi
    [6/16/2007 3:22:09 PM  890] Found system on drive C
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\WHS
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\redistr
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\DOCS
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\$OEM$
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\windows\system32\pidgen.dll
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install\winntbbu.dll
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install\q-1024x768_24bit.bmp
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install\qs.ini
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install\winnt.sif
    [6/16/2007 3:22:09 PM  890] Fixing up path C:\install\dcpromo.ini
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file D:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Continuing to configure storage
    [6/16/2007 3:22:09 PM  890] First available drive letter is I
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 1 step 3
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Continuing to configure storage
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 1 step 4
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Installing the debugger
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 1 step 5
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Disabling SIS filter
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 1 step 6
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Configuring to fix MFT $Upcase table on next reboot
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 2 step 0
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Converting the volume to dynamic
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 2 step 1
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Converting the volume to dynamic
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 2 step 2
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Converting the volume to dynamic
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 3 step 0
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Advancing to stage 4 step 0
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] Install step is set to 5
    [6/16/2007 3:22:09 PM  890] Configuring the network
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:22:09 PM  890] IP address is NOT configured in qs.ini. Dynamic IP address will be used.
    [6/16/2007 3:22:09 PM  890] Success!
    [6/16/2007 3:22:09 PM  890] Advancing to stage 5 step 0
    [6/16/2007 3:22:09 PM  890] Rebooting the OS
    [6/16/2007 3:22:09 PM  890] Progress: 0%
    [6/16/2007 3:22:09 PM  890] The system will reboot in 10 seconds...
    [6/16/2007 3:22:10 PM  890] Progress: 10%
    [6/16/2007 3:22:10 PM  890] The system will reboot in 9 seconds...
    [6/16/2007 3:22:11 PM  890] Progress: 20%
    [6/16/2007 3:22:11 PM  890] The system will reboot in 8 seconds...
    [6/16/2007 3:22:12 PM  890] Progress: 30%
    [6/16/2007 3:22:12 PM  890] The system will reboot in 7 seconds...
    [6/16/2007 3:22:13 PM  890] Progress: 40%
    [6/16/2007 3:22:13 PM  890] The system will reboot in 6 seconds...
    [6/16/2007 3:22:14 PM  890] Progress: 50%
    [6/16/2007 3:22:14 PM  890] The system will reboot in 5 seconds...
    [6/16/2007 3:22:15 PM  890] Progress: 60%
    [6/16/2007 3:22:15 PM  890] The system will reboot in 4 seconds...
    [6/16/2007 3:22:16 PM  890] Progress: 70%
    [6/16/2007 3:22:16 PM  890] The system will reboot in 3 seconds...
    [6/16/2007 3:22:17 PM  890] Progress: 80%
    [6/16/2007 3:22:17 PM  890] The system will reboot in 2 seconds...
    [6/16/2007 3:22:18 PM  890] Progress: 90%
    [6/16/2007 3:22:18 PM  890] The system will reboot in 1 seconds...
    [6/16/2007 3:24:49 PM  6f0] Trying to load c:\install\winntbbu.dll
    [6/16/2007 3:24:50 PM  700] Installer initialized with parameters -continue
    [6/16/2007 3:24:50 PM  700] Current product version 6.0.1424.2
    [6/16/2007 3:24:50 PM  700] Setup has [re]started at mode 3 stage 5 step 0
    [TRACE] Looking for template x:\files
    [TRACE] Checked file C:\files, error 2
    [TRACE] Checked file I:\files, error 2
    [6/16/2007 3:24:50 PM  700] Found file X:\files
    [6/16/2007 3:24:50 PM  700] Found WHS on drive X
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\files
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\WHS
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\REDISTR
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003\I386\pidgen.dll
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\files\DOCS\eula.txt
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003\I386\privstmt.rtf
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003\i386\winntbbu.dll
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003\I386\TXTSETUP.SIF
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\SVR_2003\I386\intl.inf
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\TESTS\dbg_x86.msi
    [6/16/2007 3:24:50 PM  700] Fixing up path X:\TESTS\coverage\magellan.msi
    [6/16/2007 3:24:50 PM  700] Found system on drive C
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\WHS
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\redistr
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\DOCS
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\$OEM$
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\windows\system32\pidgen.dll
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install\winntbbu.dll
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install\q-1024x768_24bit.bmp
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install\qs.ini
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install\winnt.sif
    [6/16/2007 3:24:50 PM  700] Fixing up path C:\install\dcpromo.ini
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:24:50 PM  700] Install step is set to 5
    [6/16/2007 3:24:50 PM  700] Updating Windows Update Redirector
    [6/16/2007 3:24:50 PM  700] Spawning process [C:\redistr\WindowsUpdateAgent30-x86.exe /quiet /norestart]
    [6/16/2007 3:25:00 PM  700] ERROR: Process failed (with return code 3010)
    [6/16/2007 3:25:00 PM  700] Process returned the following message:

    [TRACE] ExecCmd : Exited (0x800703eb)
    [TRACE] Step_UpdateWURedir : Exited (0x800703eb)
    [6/16/2007 3:25:00 PM  700] Updating Windows Update Redirector failed. Error 0x800703eb.
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:25:00 PM  700] MessageBox: Updating Windows Update Redirector failed: Cannot complete this function.

     (error code 0x800703eb).
    [6/16/2007 3:25:52 PM  700] Windows Home Server setup failed. The error code is 0x800703eb. Please correct the problem and reboot to restart the setup program.
    [TRACE] Looking for template _:\qs.ini
    [TRACE] Checked file C:\qs.ini, error 2
    [TRACE] Checked file I:\qs.ini, error 2
    [TRACE] Checked file X:\qs.ini, error 2
    [TRACE] Template _:\qs.ini NOT FOUND!
    [TRACE] FindOnMedia : Exited (0x80070002)
    [TRACE] FindSetupFile : Exited (0x80070002)
    [6/16/2007 3:25:52 PM  700] MessageBox: Windows Home Server installation failed. Do you want to view the installation log file?
    [6/16/2007 3:26:10 PM  700] Spawning process [notepad.exe "C:\Documents and Settings\All Users\Application Data\Microsoft\Windows Home Server\logs\q_setup.log"]

    Saturday, June 16, 2007 3:33 AM
  • Update on the problem and a possible solution...


    Fascinating problem. Yesterday I copied the iso from my laptop to a backup ext usb hdd and then to the vista pc with dvd burner.

     

    The crc32 check showed the laptop version from MS was ok but the version on the ext hdd was different. Today I copied it across to the ext hdd 6 times and every checksum was different.

     

    Now copied the good one directly from laptop -> WHS via connect software and checksum is ok. Burning a new dvd now.

     

    This is a real eye opened re reliability (or something). What do u think the problem would be? Bad hdd surface? Usb? Dodgy usb interface hardware?

     

    Trying a new re-install again now.


    My suggestion is to do the checksum thing as I have wasted almost a day and you probably don't want to do the same :-(

    Saturday, June 16, 2007 6:24 AM
  • Looks like copying the iso from the laptop -> ext hdd -> dvd burning pc was flawed at the move-to-ext-hdd stage.

    The install has been flawless so far and it is nearing completion.

    Ouch, this has been an interesting experience. Moral of the story would be to check the iso checksum ON THE PC you are doing the dvd burning on.

    Rebooting now......

    Working!!!
    Saturday, June 16, 2007 7:27 AM
  •  

    I got the same problem here.

     

    I had no issues with the Beta releases, including RC1. Bought an OEM version through reseller in NL last month and experiencing exactly the same problem as above. First time install came through and use WHS for a while. Got more and more error mesages resulting in rebooting teh WHS server almost twice a week until last week the server didn't respond anymore and kept rebooting itself (same as above).

     

    Reinstalled WHS and got also copy failure on confmsp.dll and just before the end of installation it fails on "Updating windows redirector update redirector". This has error code 0x800707eb.

     

    I have original OEM DVD, so it shouldn't be copy/CRC error.

     

    Please help

    Wednesday, November 7, 2007 11:20 PM
  •  Robert0 wrote:
    I got the same problem here.

     

    I had no issues with the Beta releases, including RC1. Bought an OEM version through reseller in NL last month and experiencing exactly the same problem as above. First time install came through and use WHS for a while. Got more and more error mesages resulting in rebooting teh WHS server almost twice a week until last week the server didn't respond anymore and kept rebooting itself (same as above).

     

    Reinstalled WHS and got also copy failure on confmsp.dll and just before the end of installation it fails on "Updating windows redirector update redirector". This has error code 0x800707eb.

     

    I have original OEM DVD, so it shouldn't be copy/CRC error.

     

    Please help

     

    I think your only option would be to try a Server Reinstallation (and maybe use a different DVD drive than last time).  If it still happens, it could be bad media...

    Wednesday, November 7, 2007 11:53 PM
    Moderator