locked
MGA Validation issue with met requirements RRS feed

  • Question

  • Excuse Me Microsoft,

     

    I am having continous issues validating my system even after I have tried several resolutions (searching forums, Microsoft recommended resolves, etc.) and i keep coming up with an "unknown" validation error even though my diagnostic report declares i am using Genuine software and please Microsoft help me find a way to get past this and to donwload DirectX9.0c

     

     

     

     

     

     

     

    Diagnostic Report (1.7.0095.0):
    -----------------------------------------
    WGA Data-->
    Validation Status: Genuine
    Validation Code: 0
    Online Validation Code: N/A
    Cached Validation Code: N/A
    Windows Product Key: *****-*****-2XDW6-YJ7VP-QXT23
    Windows Product Key Hash: ETP3SJKjQRay4rUb1Y24HsE2Vw4=
    Windows Product ID: 76477-OEM-2163277-95989
    Windows Product ID Type: 3
    Windows License Type: OEM System Builder
    Windows OS version: 5.1.2600.2.00010300.2.0.hom
    CSVLK Server: N/A
    CSVLK PID: N/A
    ID: {1F5B61E6-B2F3-4D8C-84F3-2CEB4865DEA3}(3)
    Is Admin: Yes
    TestCab: 0x0
    WGA Version: Registered, 1.7.69.2
    Signed By: Microsoft
    Product Name: N/A
    Architecture: N/A
    Build lab: N/A
    TTS Error: N/A
    Validation Diagnostic: 025D1FF3-171-1
    Resolution Status: N/A

    WgaER Data-->
    ThreatID(s): N/A
    Version: N/A

    WGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002

    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    WGATray.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002

    OGA Data-->
    Office Status: 109 N/A
    OGA Version: Registered, 1.6.28.0
    Signed By: Microsoft
    Office Diagnostics: B4D0AA8B-604-645_B4D0AA8B-604-645_B4D0AA8B-604-645_025D1FF3-171-1

    Browser Data-->
    Proxy settings:
    User Agent: Mozilla/4.0 (compatible; MSIE 6.0; Win32)
    Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed

    File Scan Data-->
    File Mismatch: C:\WINDOWS\system32\winlogon.exe[5.1.2600.2180]
    File Mismatch: C:\WINDOWS\system32\licdll.dll[5.1.2600.2180]
    File Mismatch: C:\WINDOWS\system32\ntoskrnl.exe[5.1.2600.2643]
    File Mismatch: C:\WINDOWS\system32\ntdll.dll[5.1.2600.2180]
    File Mismatch: C:\WINDOWS\system32\kernel32.dll[5.1.2600.2180]
    File Mismatch: C:\WINDOWS\system32\crypt32.dll[5.131.2600.2180]
    File Mismatch: C:\WINDOWS\system32\advapi32.dll[5.1.2600.2180]
    File Mismatch: C:\WINDOWS\system32\setupapi.dll[5.1.2600.2180]
    File Mismatch: C:\WINDOWS\system32\oembios.bin[hr = 0x80070714]
    File Mismatch: C:\WINDOWS\system32\oembios.dat[hr = 0x80070714]
    File Mismatch: C:\WINDOWS\system32\oembios.sig[hr = 0x80070714]
    File Mismatch: C:\WINDOWS\system32\syssetup.dll[5.1.2600.2180]

    Other data-->

     

     

    Pls Help Microsoft Smile and repond ASAP!
    Monday, June 23, 2008 8:25 AM

Answers

  • DremanDBC,

     

    Please follow the below steps manually for a resolve. If this doesn’t work please touch back with the forum again.

     

    1.

    Click Start, and then click Run.

    2.

    In the Open box, type cmd, and then click OK.

    3.

    At the command prompt, type "regsvr32 softpub.dll", and then press ENTER.

    4.

    Click OK when you receive the message that DllRegisterServer in Softpub.dll succeeded.

    Repeat steps 1 through 4 for the following files: Wintrust.dll, Initpki.dll, Dssenh.dll, Rsaenh.dll, Gpkcsp.dll, Sccbase.dll, Slbcsp.dll, Mssip32.dll, and Cryptdlg.dll. Remember to put regsvr32 in front of all the .dll's in mention. ("regsvr32 wintrust.dll")

    "regsvr32 wintrust.dll"

    "regsvr32 Initpki.dll"

    "regsvr32 Dssenh.dll"

    "regsvr32 Rsaenh.dll"

    "regsvr32 Gpkcsp.dll"

    "regsvr32 Sccbase.dll"

    "regsvr32 Slbcsp.dll"

    "regsvr32 Mssip32.dll"

    "regsvr32 Cryptdlg.dll"

     

    5) After all the above files have been re-registered, type Exit at the command prompt to close it and return to Windows.

     

    6) Restart Windows and try to authenticate Windows again.

     

    You can also run the check disk utility http://support.microsoft.com/kb/315265 and see if that helps.

     

    Lori MS

    Tuesday, June 24, 2008 8:42 PM

All replies

  • Dreman,

     

    Currently Windows is Genuine. The problem you’re experiencing is with the Cryptographic service on your computer. Cryptographic service is a standard service that runs under Windows XP and is used by Windows Genuine Advantage (WGA) to read the Digital Signatures of files on the computer. If the Cryptographic service have errors (as seen in your Diagnostic Report "Validation Status: Cryptographic Errors Detected") WGA cannot Validate a Genuine status.

     

     There is a very easy fix for this. Open Internet Explorer and type the following website in for the URL: http://www.microsoft.com/Genuine/diag/ .  Once you open please click the “Start Diagnostic" button. Click the “Resolve Now” button if/when the tool finds any issues.  The tool will, most likely, resolve the issue on its own or will provide you further instructions.

    Next try this should the above fail: http://support.microsoft.com/kb/822798/en-us  

     

    Take care,

     

    Stephen Holm

    WGA Forum Volunteer

    Monday, June 23, 2008 4:44 PM
  •  

    Stephen,

     

     

    I have tried every method and i get an error in the ones involving running the system.msc and on the other methods my cpu has completed those processes already(renamed files, removed files, added files, etc.) I have also tried to validate after trying each method and i come up with an error always. Please help me resolve.

    Monday, June 23, 2008 6:03 PM
  •  

    Also,

     

    I am not able Services.msc which i think might solve the problem if i could get in there i cannot access even with admin account please help me find a way around this problem.

    Monday, June 23, 2008 11:13 PM
  • DremanDBC,

     

    Please follow the below steps manually for a resolve. If this doesn’t work please touch back with the forum again.

     

    1.

    Click Start, and then click Run.

    2.

    In the Open box, type cmd, and then click OK.

    3.

    At the command prompt, type "regsvr32 softpub.dll", and then press ENTER.

    4.

    Click OK when you receive the message that DllRegisterServer in Softpub.dll succeeded.

    Repeat steps 1 through 4 for the following files: Wintrust.dll, Initpki.dll, Dssenh.dll, Rsaenh.dll, Gpkcsp.dll, Sccbase.dll, Slbcsp.dll, Mssip32.dll, and Cryptdlg.dll. Remember to put regsvr32 in front of all the .dll's in mention. ("regsvr32 wintrust.dll")

    "regsvr32 wintrust.dll"

    "regsvr32 Initpki.dll"

    "regsvr32 Dssenh.dll"

    "regsvr32 Rsaenh.dll"

    "regsvr32 Gpkcsp.dll"

    "regsvr32 Sccbase.dll"

    "regsvr32 Slbcsp.dll"

    "regsvr32 Mssip32.dll"

    "regsvr32 Cryptdlg.dll"

     

    5) After all the above files have been re-registered, type Exit at the command prompt to close it and return to Windows.

     

    6) Restart Windows and try to authenticate Windows again.

     

    You can also run the check disk utility http://support.microsoft.com/kb/315265 and see if that helps.

     

    Lori MS

    Tuesday, June 24, 2008 8:42 PM