How to Cx700/Tanjay R2 update RRS feed

  • Question

  •  Hello,
    I used the OCS R2 environment, and I would like to use my CX 700/Tanjay in R2, for this I must update my device with the specific firmware and the specifc phone edition R2 (.cab file).

    I would like to kown how I can update my device to use in R2 area ?

    Thks in advance

    Friday, February 13, 2009 1:29 PM

All replies

  • If you have everything configured properly it should happen automatically.  Take a look at the following post for the process:

    Mike Stacy | Evangelyze Communications | http://www.evangelyze.net/cs/blogs/mike
    Friday, February 13, 2009 6:27 PM
  • Thks for your reply, but I didn't manage to update my phone because it appears to be a minimun version (1.0.522.101 (1.23)) to use the new fonction of R2 (device updater) or my phone has the 1.0.199 !
    How I do update my phone in this case ?

    In the filter version under OCPhone
        Here is the properties

    Actions :
    Allow and upgrade

    Folder contains the upgrade :

    D:\Program Files\Microsoft Office Communications Server 2007 R2\Web Components\DeviceUpdateFiles\DeviceUpdates\UCPhone\Microsoft\CPE\A\ENU\1.0.522.101 or 3.5 \CPE

    In the Device Updater, I put the both versions (1.0.522.101 and 3.5)

    Thks in advance
    Monday, February 23, 2009 3:49 PM
  • You should try updating to 522.101 in an OCS R1 environment. In such old versions you need to import root ca certificate via USB stick (or network) first. Very ambitious project all in all :-)
    Johann Deutinger | MCTS Exchange 2007 / OCS 2007
    Monday, February 23, 2009 10:59 PM
  • I have only an R2 environement to upgrade my phone, my R1 is not available (removed) !
    Can I still have a solution ?

    Tuesday, February 24, 2009 6:41 AM
  •  http://www.imagefreehost.com/files/24022009/df79332524929.jpg
    Tuesday, February 24, 2009 9:35 AM
  • Hi

    Did you succeeded to upgrade your .199 Tanjay ?

    I've tried as you screen shoted to change the client filter to update an old .199 version with R2 update server: when I try to log into R2 with this version, the domo.exe through an exception.

    Friday, February 27, 2009 11:25 PM
  • This is insane.  There has to be a process for updating the firmware in a new R2 environment.  I just got some CX700's and they are for a customer that has an R2 environment already.
    Friday, March 20, 2009 7:04 PM
  • Hi,

    Stumbled on this post and I can tell you how I did it.
    In my environment the R1 was also phased out and I still had several CPX700 in beta release on the shelf.
    I altered the client version filter settings in the following manner:
    User Agent Header: OCPhone
    Version: 1.0.199* (is the version my beta release CPX's were running)
    Check: <=
    Action: Allow

    Then i pluged in the phones and had to redo the power off and plug in again to be able to log on.
    When the phones are finaly logged on to the system they receive the update package. Just be patient since this takes quite some time.

    I don't remember exactly but try
    domain\username and
    username@domain.name in the credentials.

    hope this helps
    Monday, March 23, 2009 5:25 PM