locked
Could not creat the query dialog Error RRS feed

  • Question

  • Hi All
    i recievce error "Could not creat the query dialog"
    when i expand the OCS pool and right click on users folder and choose find
    -installed OCS STD R2 on windows 2008
    -In the PBA is says that administrative tools aren't installed on the client M/C thought it is, i cannot figure out what this could be
    this issue i've faced in different deployments
    have anyone faced such similar issue?
    Wednesday, June 3, 2009 10:42 AM

Answers

All replies

  • Hi m.wahab

         Please check this link:
    http://social.microsoft.com/Forums/en-US/communicationsserversetup/thread/b3ee562a-3631-4ba4-b351-3d89bf3af00a



    Here is info from the deployment doc. You should go download the OCS Deployment docs, all this info is right there.

    Create and Verify DNS SRV and A Records for Client Automatic Client Sign-in

    You must create DNS SRV records in your internal DNS for every SIP domain. The following procedure assumes that your internal DNS has zones for your SIP user domains.

     

     

    To create a DNS SRV record

    1.        On the DNS server, click Start , click Control Panel , click Administrative Tools , and then click DNS .

    2.        In the console tree for your SIP domain, expand Forward Lookup Zones , and then right-click the SIP domain in which your Office Communications Server will be installed.

    3.        Click Other New Records .

    4.        In Select a resource record type , click Service Location (SRV) , and then click Create Record .

    5.        Click Service , and then type _sipinternaltls .

    6.        Click Protocol , and then type _tcp .

    7.        Click Port Number , and then type 5061 .

    8.        Click Host offering this service , and then type the FQDN of the Standard Edition Server.

    9.        Click OK.

    10.     Click Done .

    After you have created the DNS SRV record, create a DNS A for the Standard Edition Server.

     

    To create a DNS A record

    1.        On the DNS server, click Start , click Control Panel , click Administrative Tools , and then click DNS .

    2.        In the console tree for your domain, expand Forward Lookup Zones , and then right-click the domain in which your Office Communications Server will be installed.

    3.        Click New Host (A) .

    4.        Click Name (uses parent domain name if blank) , and then type the name of the pool.

    5.        Click IP Address , and then enter the IP address of the Standard Edition Server.

    6.        Click Add Host , and then click OK .

    7.        Click Done .

    To verify that the required records have been created successfully, wait for DNS replication (if you have just added the records), and then verify that the records were created as described in the next procedure.

     

    Note

    For illustrative purposes, the following procedure uses example.com as the domain portion of the SIP URI namespace. When executing these steps, use your actual SIP domain name instead.


     

     

    To verify the creation of a DNS SRV record

    1.        Log on to a client computer in the domain with an account that is a member of the Administrators group or has equivalent permissions.

    2.        Click Start , and then click Run . In the Open box, type cmd , and then click OK .

    3.        At the command prompt, type nslookup , and then press ENTER.

    4.        Type set type=srv , and then press ENTER.

    5.        Type _sipinternaltls._tcp.example.com , and then press ENTER. The output displayed for the TLS record is as follows:

    Server:  <dns server>.corp.example.com

    Address:  <IP address of DNS server>

    Non-authoritative answer:

    _sipinternaltls._tcp.example.com SRV service location:

              priority       = 0

              weight         = 0

              port           = 5061

              svr hostname   = server1.example.com

    server1.example.com       internet address = <IP address of the Standard Edition Server>

     

    6.        When you are finished, at the command prompt, type exit , and then press ENTER .

    After you configure the DNS records, verify that the FQDN of the Standard Editon Server can be resolved by DNS.

     

    To verify that the FQDN of the Standard Edition Server can be resolved

    1.        Log on to a client computer in the domain.

    2.        Click Start , and then click Run . In the Open box, type cmd , and then click OK .

    3.        At the command prompt, type ping < FQDN of the Standard Editon Server > , and then press ENTER.

    4.        Verify that you receive a response similar to the following, where the IP address returned is the IP address of the Standard Edition Server.

    Reply from 172.27.176.117: bytes=32 time<1ms TTL=127

    Reply from 172.27.176.117: bytes=32 time<1ms TTL=127

    Reply from 172.27.176.117: bytes=32 time<1ms TTL=127

    Reply from 172.27.176.117: bytes=32 time<1ms TTL=127




    Thanks

     

    Wednesday, June 3, 2009 1:27 PM
  • hi  sharadsharma2k5
     the error i sent is totally irrelevant to the article u sent, MOC clients are working just fine,conferencing attendant is working too, DNS recoreds are all made and there's no problem
    the only thing i face and cannot resolve is what mentioned in the article few 1st lines

    In management snap-in the User container of the Standard edition server I installed on gives an error when I try to find users. The error is: Could not create the query dialog. Can't find any refernce to what this error means
    • Marked as answer by M.Wahab Monday, June 29, 2009 9:18 AM
    • Unmarked as answer by M.Wahab Monday, June 29, 2009 9:18 AM
    Wednesday, June 3, 2009 1:50 PM

  • Perhaps the pre-requisites described here and here would be useful?

    Thanks for letting us know if this helps.



    http://www.leedesmond.com
    Tuesday, June 30, 2009 9:41 AM
    Moderator