locked
HP-6500 wireless printer support RRS feed

  • Question

  • IS THERE A PATCH OR UPDATE TO ENABLE ONECARE TO SUPPORT THE HP6500 WIRELESS PRINTER? I HAVE TO TURN OFF THE FIREWALL AND REBOOT TO BE ABLE TO PRINT OR SCAN.
    Tuesday, September 15, 2009 11:55 PM

Answers

  • I am not familiar with that printer. Printing should work easily, though using the scan capabilities will likely require going to the advanced firewall properties in OneCare to allow the ports and application to have access through the firewall.

    According to this HP document, http://h10032.www1.hp.com/ctg/Manual/c01669416.pdf, the printer requires UDP port 427 to be open in the firewall.
    Ports and protocols tab in advanced firewall:
    Add
    Name - anything you want
    TCP or UDP - UDP
    Port Range - 427 to 427
    For Connections - both
    Scope - Local  *(you can try Internet if it still doesn't work with local)

    The document has another listing of ports for other functions of the device. You'll need to add each of these one at a time per the above, changing the Port Range for each new entry to match the list.
    "The following ports are also used by your HP device and might need to be opened on your firewall configuration.
    Incoming ports (UDP) are destination ports on the computer while outgoing ports (TCP) are destination ports on the
    HP device.
    • Incoming (UDP) ports: 137, 138, 161, 427
    • Outgoing (TCP) ports: 137, 139, 427, 9100,
    9220, 9500
    The ports are used for the following functions:
    Printing
    • UDP ports: 427, 137, 161
    • TCP port: 9100
    Photo card upload
    • UDP ports: 137, 138, 427
    • TCP port: 139
    Scanning
    • UDP port: 427
    • TCP ports: 9220, 9500
    HP device status
    UDP port: 161
    Faxing
    • UDP port: 427
    • TCP port: 9220
    HP device installation
    UDP port: 427"


    On page 12 of the HP document, it lists the following applications that also need to be allowed in the firewall on the Programs tab:
    (Click add and then navigate to the listed file to add it to the allow list. Repeat for each file)
    "hpqkygrp.exe, located in C:\program
    files\HP\digital imaging\bin
    • hpqscnvw.exe, located in C:\program
    files\HP\digital imaging\bin
    • hpqste08.exe, located in C:\program
    files\HP\digital imaging\bin
    • hpqtra08.exe, located in C:\program
    files\HP\digital imaging\bin
    • hpqthb08.exe, located in C:\program
    files\HP\digital imaging\bin"

    If all of the above fail, please contact support.

    How to reach support (FAQ) - http://social.microsoft.com/Forums/en-US/onecareinstallandactivate/thread/30400b52-7f26-4ba0-bc18-17e305329d90

     

     

    -steve


    Microsoft MVP Windows Live / Windows Live OneCare, Live Mesh, & MS Security Essentials Forums Moderator
    Wednesday, September 16, 2009 12:51 PM
    Moderator