locked
win xp media center RRS feed

  • Question

  • Pc boots up then after about 1.5 minutes pc will shut down and restart cycling on & off.

     

    When I try to run win xp cd I get this error message.

    A problem has been detected & windows has been shut down to prevent damage to your computer.

    If this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps:

    Check to be sure you have adequate disk space. if a driver is identified in the stop message,disable the driver or check with the manufacturer for driver updated. try changing video adapters.

    Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as chachingor shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

    Technical information:

    *** STOP: 0x0000007E (0xC0000005, 0xF76440BF, 0xF7A90208, 0xF7A8ff08)

    *** pci.sys - Address F76440BF base at F763D000, DateStamp 3b7d855c.
    I have tried everything I am at a loss.

    Monday, February 25, 2008 12:24 PM

Answers

  •  

    Hi Plumber,

     

    Thanks for posting here and I fully understand the inconvenience you have encountered.

     

    After checking the issue, it seems this is a general Windows XP issue. As this forum focuses on SteadyState specific issues, this inquiry would best be posted to Windows XP newsgroup:

     

    http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windowsxp.hardware

     

    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the newsgroups regularly can either share their knowledge or learn from your interaction with us.  Thank you for your understanding.

     

    Also, for your information, I'd like to include the following article regarding the issue:

     

    You receive a stop error 0x7E in Pci.sys

    http://support.microsoft.com/kb/839641

     

    Best regards,

    Tuesday, February 26, 2008 2:53 AM