none
win 7 build 7601 this copy is not genuine again RRS feed

  • Question

  • I purchased an OEM version of windows 7 home premium 64bit from Newegg.com  I installed it onto a new homebrew desktop with ECS mobo, amd athelon ii X3 processor, etc... The install went perfectly, but at the end of the install the OS desktop  continually displays the following:    " windows 7    Build 7601    This copy of windows is not genuine"   I installed a different OEM  win 7 OS on another computer a few months ago, and did not have this problem... I did not activate this computer yet, because i usually want to make sure it will run properly for a few days or so. And after I have set it up the way I want it, and it runs flawlessly  for a week or two, then I activate it...  Plus this time I get that NOT GENUINE message....   I did not have the internet connected while installing the OS, and still not connected to internet.  Said I would activate later !!!

    I will try to put that "win genuine diagnostic tool" info below to help determine if it truly is a forgery or not.   All help is appreciated.... Thanks   Steve

    Diagnostic Report (1.9.0027.0):
    -----------------------------------------
    Windows Validation Data-->
     
    Validation Code: 50
    Cached Online Validation Code: N/A, hr = 0xc004f012
    Windows Product Key: *****-*****-MQDKB-FC7XG-KXJKW
    Windows Product Key Hash: 1fpL8RTMHctRVDelIwUXEgCfUtU=
    Windows Product ID: 00359-OEM-8703721-78311
    Windows Product ID Type: 3
    Windows License Type: OEM System Builder
    Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {7FB745CC-6712-4097-82FD-5270F94D8520}(1)
    Is Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/A, hr = 0x80070002
    Signed By: N/A, hr = 0x80070002
    Product Name: Windows 7 Home Premium
    Architecture: 0x00000009
    Build lab: 7601.win7sp1_rtm.101119-1850
    TTS Error:  
    Validation Diagnostic:  
    Resolution Status: N/A
     
    Vista WgaER Data-->
    ThreatID(s): N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
     
    Windows XP Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002
     
    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    OGAExec.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002
     
    OGA Data-->
    Office Status: 109 N/A
    OGA Version: N/A, 0x80070002
    Signed By: N/A, hr = 0x80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
     
    Browser Data-->
    Proxy settings:  
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default Browser: C:\Program Files (x86)\Internet Explorer\iexplore.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed
     
    File Scan Data-->
    File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
     
    Other data-->
    Office Details: <GenuineResults><MachineData><UGUID>{7FB745CC-6712-4097-82FD-5270F94D8520}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-KXJKW</PKey><PID>00359-OEM-8703721-78311</PID><PIDType>3</PIDType><SID>S-1-5-21-1985396831-2140898433-1669343414</SID><SYSTEM><Manufacturer>ECS</Manufacturer><Model>A880GM-M7</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>080015 </Version><SMBIOSVersion major="2" minor="6"/><Date>20100623000000.000000+000</Date></BIOS><HWID>F45F3A07018400F4</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>   
     
    Spsys.log Content: 0x80070002
     
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
     
    Name: Windows(R) 7, HomePremium edition
    Description: Windows Operating System - Windows(R) 7, OEM_COA_NSLP channel
    Activation ID: 586bc076-c93d-429a-afe5-a69fbc644e88
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00174-037-278311-02-1033-7601.0000-2422010
    Installation ID: 012074072152413291498804391862923061822070444932362452
    Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial Product Key: KXJKW
    License Status: Notification
    Notification Reason: 0xC004F009 (grace time expired).
    Remaining Windows rearm count: 3
    Trusted time: 11/17/2010 5:06:09 PM
     
    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: N/A
    HealthStatus: 0x0000000000000000
    Event Time Stamp: N/A
    ActiveX: Not Registered - 0x80040154
    Admin Service: Not Registered - 0x80040154
    HealthStatus Bitmask Output:
     
     
    HWID Data-->
    HWID Hash Current: NAAAAAIABAABAAEAAAACAAAAAQABAAEA6GHAKlKaXH5U8hAzrMdKp8a0TLDqRcDNAKoYeQ==
     
    OEM Activation 1.0 Data-->
    N/A
     
    OEM Activation 2.0 Data-->
    BIOS valid for OA 2.0: yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID Consistent: N/A
    BIOS Information:  
      ACPI Table Name    OEMID Value    OEMTableID Value
      APIC            062310        APIC1448
      FACP            062310        FACP1448
      SRAT            AMD           FAM_F_10
      HPET            062310        OEMHPET  
      MCFG            062310        OEMMCFG  
      OEMB            062310        OEMB1448
      EWMI            062310        OEMB1448
      SSDT            A M I         POWERNOW

    • Edited by shusko9 Wednesday, November 16, 2011 10:58 PM
    Wednesday, November 16, 2011 10:40 PM

Answers

  • It should. You may have to active by phone.

     

     

     

    • Marked as answer by shusko9 Thursday, November 17, 2011 12:10 AM
    Thursday, November 17, 2011 12:06 AM
    Answerer

All replies

  • The only item of interest in the report is that the product key from the dvd case has not yet been entered and that the 30-day grace period is past.

    License Status: Notification
    Notification Reason: 0xC004F009 (grace time expired).

    You apparently did a keyless installation.

    Note:  OEM System Builder licenses are not for do-it-yourselfers (homebrew, if you like).  The correct license is full retail.  SB licenses are specifically for those who build computers for sale to customers.  This is detailed on NewEgg's product detail tab for this product at:

    http://www.newegg.com/Product/Product.aspx?Item=N82E16832116983

    This is the exact text:

    "Disclaimer

    Use of this OEM System Builder Channel software is subject to the terms of the Microsoft OEM System Builder License. This software is intended for pre-installation on a new personal computer for resale. This OEM System Builder Channel software requires the assembler to provide end user support for the Windows software and cannot be transferred to another computer once it is installed. To acquire Windows software with support provided by Microsoft please see our full package "Retail" product offerings."

    The SB license is plainly printed on the wrapper of the SB pack and states in pertinent part:

    "2. Authorized Distribution and Acceptance. To distribute the Software or Hardware in this Pack, you must be a System Builder
    and accept this license. “System Builder” means an original equipment manufacturer, an assembler, a refurbisher, or a software
    pre-installer that sells the Customer System(s) to a third party. You accept this license when you open this Pack."

    OEM software is not intended for end users to install and requires installation using the OEM Preinstallation Kit to assure that the end user sees and accepts the EULA.


    Colin Barnhorst Windows 7 Ultimate x64 on DIY with 6GB ram.
    Wednesday, November 16, 2011 11:02 PM
    Answerer
  • Thanks  Colin for the reply....   I am building this computer to be sold. I build computers  on as needed basis for people...  I do understand the license agreement.... Personally I only use Linux OS's as they are far superior to windows... Linux is my specialty, but occassionally I have customers who only want Microsoft . ( go figure)... hehehheh     Oh I did enter the correct product key during install.......

    I just purchased this OEM a couple weeks ago, and I see it's telling me,  it is already out of the grace period by about a year..... Will it still let me activate it when I'm ready in a week or two.(after build is successful), and consider it a genuine OS, or should I RMA it back to Newegg.com????   Thanks   Steve


    • Edited by shusko9 Wednesday, November 16, 2011 11:25 PM
    Wednesday, November 16, 2011 11:22 PM
  • Trusted time: 11/17/2010 5:06:09 PM 
     

     

    Looks like your date is set wrong. You shouldn't have any problems if you correct that.

    Wednesday, November 16, 2011 11:27 PM
    Answerer
  • Hi George1009 !!!       Whoops !!  I see when I changed the date/time , that I used 2010 instead of 2011      Changed the date/time to correct and rebooted. once , no change,,,, rebooted again    still same error on desktop... George are you sayiny this error will go away when I activate it???        Thanks  Steve
    Wednesday, November 16, 2011 11:45 PM
  • It should. You may have to active by phone.

     

     

     

    • Marked as answer by shusko9 Thursday, November 17, 2011 12:10 AM
    Thursday, November 17, 2011 12:06 AM
    Answerer
  • Thanks george for the timely replies... The best to you    Steve
    Thursday, November 17, 2011 12:13 AM