SATA drivers RRS feed

  • Question

  • Hi all and thanks first of all to anyone who can help!!

    I am using an old 754 Setup to install WHS onto - I have downloaded the SATA drivers onto a USB stick and they load during the initial setup - but then when I get to the old DOS style insall screen (the one that says press F6 if you need to install additional SATA/RAID drivers)
    it gives an error saying tha it wont install error code 14.

    Is there anything I can do that does not involve buying an IDE drive

    The drivers for the SATA I have are from Jetway site http://www.jetway.com.tw/jw/motherboard_view.asp?productid=16&proname=S755MAX

    PS I do not have a floppy drive - hence the USB
    Monday, June 22, 2009 9:40 AM

All replies

  • To install drivers at the "Press F6" prompt you normally must use a floppy drive. You might be able to get away with using a USB floppy drive, but your best bet would be to just get a floppy and connect it temporarily. If need be, you can even install with the floppy sitting outside the case...
    I'm not on the WHS team, I just post a lot. :)
    Monday, June 22, 2009 4:36 PM
  • At the initial start up - it says cannot find a suitable HDD to use, and then I use a USB stick for the SATA drivers - and when it finally gets to the F6 state it errors - I dont have an issue with getting a floppy drive - I just thought there was a workaround.
    Tuesday, June 23, 2009 7:43 AM