none
求助:WLK1.2 TV Tuner Input Sources Test Fail RRS feed

Odpowiedzi

  •  

    查了一下你发来的CPK档, 该测试项会自动检测设备的输入信号源及频率值,请确定测试时有正确的信号源。

     

    以下是相关的logo requirement:

     

    STREAM-0016

    TV tuner detects signals from all input sources

    TV tuners mustbeable to detect signals from all implemented input sources (such asRF, composite, and S-Video). Sharing connections internally between S-Video and composite auxiliary inputs makes discrete signal detection between these two inputs impossible. For this reason Microsoft strongly discourages sharing connections internally between independent auxiliary connectors.

    The driver must correctly expose the proper mediums and media types related to information off the crossbar pins to determine which S-Video or composite jack matches to which S-Video jack.

    OpenCable Unidirectional Receivers (which can tune to both terrestrial and cable, analog and digital content) must be able to scan and detect signals on the various modulation types (such asNTSC, 8VSB, QAM64, and QAM256).

    OpenCable Unidirectional Receivers (OCUR) must also comply with requirements outlined in DTOS for CableLabs certification of OCUR devices.

    Design And Implementation Notes :

    Microsoft recommends that analog tuners meet video quality and RF certification requirements for TV tuners as specified by ISF Research Labs.

    poniedziałek, 30 czerwca 2008 09:43
    Moderator
  • 从错误信息来看,确实是你的信号可能有问题。

    你能在GraphEdit或者MCE或者第三方播放工具中收到信号吗?

     

    另外,你也可以手工试一下这个命令,看是否可以通过。

    tvwlptest <test case ID> “<Device ID of device you want to test>”

    poniedziałek, 30 czerwca 2008 09:50

Wszystkie odpowiedzi

  •  

    肯定pass

    poniedziałek, 30 czerwca 2008 09:09
  • 刚才有去更新DTM Errata filters,但还是出现fail.

     

    我记得WLK1.0有更新好几个才OK的.

    poniedziałek, 30 czerwca 2008 09:33
  • What is your failure in this job? 

     

    poniedziałek, 30 czerwca 2008 09:36
  •  

    查了一下你发来的CPK档, 该测试项会自动检测设备的输入信号源及频率值,请确定测试时有正确的信号源。

     

    以下是相关的logo requirement:

     

    STREAM-0016

    TV tuner detects signals from all input sources

    TV tuners mustbeable to detect signals from all implemented input sources (such asRF, composite, and S-Video). Sharing connections internally between S-Video and composite auxiliary inputs makes discrete signal detection between these two inputs impossible. For this reason Microsoft strongly discourages sharing connections internally between independent auxiliary connectors.

    The driver must correctly expose the proper mediums and media types related to information off the crossbar pins to determine which S-Video or composite jack matches to which S-Video jack.

    OpenCable Unidirectional Receivers (which can tune to both terrestrial and cable, analog and digital content) must be able to scan and detect signals on the various modulation types (such asNTSC, 8VSB, QAM64, and QAM256).

    OpenCable Unidirectional Receivers (OCUR) must also comply with requirements outlined in DTOS for CableLabs certification of OCUR devices.

    Design And Implementation Notes :

    Microsoft recommends that analog tuners meet video quality and RF certification requirements for TV tuners as specified by ISF Research Labs.

    poniedziałek, 30 czerwca 2008 09:43
    Moderator
  • STREAM-0016
    Message  
    Message  Test Module Is: TvWlpTunerTests.EXE - 6.0.6001.17031
    Message  Logo Program Broadcast Type Name is PAL
    Message  TestCase STREAM-0016 using device USB2.0 TV BOX (PnpDeviceId USB\VID_0572&PID_8606\20071227)
    Message  LogoType is 0x00000001 - Tuner Type is 1 - AnalogTV
    Message  Testing filter for PAL support
    Message  Tuner is a PAL tuner.
    Message  ============================================================
    Message  Testing AnalogTV tuner: Conexant Livewire Tuner
    Message  Creating graph for PAL/SECAM tuner...
    Message  Testing Video Tuner input...
    Message  SBE file path is C:\ProgramData\{DB43107F-CEFD-433C-8ACA-77388AD1CE74}.tmp
    Message  Built VidCtl sink graph with Encoder 'ArcSoft Media Center Encoder'
    Message  Set VMR9 as active video renderer
    Message  Crossbar detected
    Message  Verifying presence of input source...
    Message  Warning: could not detect horizontal lock on input source
    Message  
    End Test  STREAM-0016
    Result:   Fail
    Repro:   C:\WTT\JobsWorkingDir\Tasks\WTTJobRunCB19438E-9168-4E42-BDDB-A36B3052C99C\TvWLPTunerTests.exe 

     

    poniedziałek, 30 czerwca 2008 09:45
  • 从错误信息来看,确实是你的信号可能有问题。

    你能在GraphEdit或者MCE或者第三方播放工具中收到信号吗?

     

    另外,你也可以手工试一下这个命令,看是否可以通过。

    tvwlptest <test case ID> “<Device ID of device you want to test>”

    poniedziałek, 30 czerwca 2008 09:50
  •  

    问题已得到解决,是没有对上相应的频率值.

    wtorek, 1 lipca 2008 03:16