none
关于进行产品徽标认证的条件(环境、测试项等) RRS feed

  • Pergunta

  • 我是一个WHQL的新手,我想请问一下版主,我们要进行类似于MP3产品的徽标认证,需要进行怎样的准备?
    1.需要搭建什么样的环境?
    2.需要运行DTM的哪些测试项?

    目前我们拥有的WLK版本为:WLK1.4、WLK1.5

    如果有做过类似产品徽标认证的朋友,希望能给一些帮助,非常感谢!
    quarta-feira, 2 de dezembro de 2009 02:03

Respostas

  • Media Player Testing Overview

    The procedures presented in this section outline the process for testing your Media Player for proper functionality with the Microsoft Windows operating system. These procedures use the Microsoft Windows Logo Kit (WLK) and Driver Test Manager (DTM). To ensure full functionality, you must run all of the tests that the DTM identifies as required for the device. If your product provides bus-specific support, you must run the appropriate bus-specific tests in addition to the standard tests.

    Using the Test Procedure Help Topics

    The test procedures are divided into the following types of topics:

    Overview: The overview topics describe the hardware, software, and tester knowledge requirements.

    Preparing: The preparing topics describe how to configure the system or systems for logo testing.

    Running: The running topics describe how to run to run the tests for your device or system.

    Media Player Tests

    The list of tests needed to be run depends upon the capabilities of the device or system being tested. To see the complete list of tests that could be required for your device, see the Media Player Tests.

    Run time: Approximately 24-48 hours

     

    Hardware requirements

    The following hardware is required for Media Player testing. Additional hardware may be required if the test device provides bus-specific support. See the test description for each bus-specific test to determine if there are additional hardware requirements.

    • System that supports USB 2.0
    • A USB cable for the device you are testing

    Other Device Requirements

    The following is required to run the portable media device testing component of the WLK:

    • Your device must install with the Microsoft Media Transfer Protocol class driver.
    • For Windows Vista and later versions, your device must appear under the Portable Devices category in Device Manager.
    • The battery on the device should be fully charged before testing is started.
    • Device must include at least one sample of each format type supported by the device.
    • If the device supports removable media, the media must be added before testing.

    Software requirements

    The following software is required to run the Media Player tests:

    • No additional software is needed.
    • Marcado como Resposta kainyang quarta-feira, 2 de dezembro de 2009 09:58
    quarta-feira, 2 de dezembro de 2009 04:39
    Moderador

Todas as Respostas

  • 可以联系我:whql@live.com
    quarta-feira, 2 de dezembro de 2009 02:30
  • 论坛置顶的贴子里有新手教程. 建议看一下.
    MP3产品拿Windows Logo的话需要支持MTP协议。
    如果只作为一个USB大容量存储设备来测试也可以,但不能使用Windows徽标。
    或者按未归类设备unclassify设备类类测试。后两者都可以拿到微软数字签名。

    WHQL流程相关的问题可发邮件到HICWHQL@microsoft.com,可以获得微软工程师的支持。
    quarta-feira, 2 de dezembro de 2009 02:40
    Moderador
  • 谢谢,如果要做MP3或MP4设备的认证,需要搭建一个什么样的测试环境呢?
    quarta-feira, 2 de dezembro de 2009 04:18
  • Media Player Testing Overview

    The procedures presented in this section outline the process for testing your Media Player for proper functionality with the Microsoft Windows operating system. These procedures use the Microsoft Windows Logo Kit (WLK) and Driver Test Manager (DTM). To ensure full functionality, you must run all of the tests that the DTM identifies as required for the device. If your product provides bus-specific support, you must run the appropriate bus-specific tests in addition to the standard tests.

    Using the Test Procedure Help Topics

    The test procedures are divided into the following types of topics:

    Overview: The overview topics describe the hardware, software, and tester knowledge requirements.

    Preparing: The preparing topics describe how to configure the system or systems for logo testing.

    Running: The running topics describe how to run to run the tests for your device or system.

    Media Player Tests

    The list of tests needed to be run depends upon the capabilities of the device or system being tested. To see the complete list of tests that could be required for your device, see the Media Player Tests.

    Run time: Approximately 24-48 hours

     

    Hardware requirements

    The following hardware is required for Media Player testing. Additional hardware may be required if the test device provides bus-specific support. See the test description for each bus-specific test to determine if there are additional hardware requirements.

    • System that supports USB 2.0
    • A USB cable for the device you are testing

    Other Device Requirements

    The following is required to run the portable media device testing component of the WLK:

    • Your device must install with the Microsoft Media Transfer Protocol class driver.
    • For Windows Vista and later versions, your device must appear under the Portable Devices category in Device Manager.
    • The battery on the device should be fully charged before testing is started.
    • Device must include at least one sample of each format type supported by the device.
    • If the device supports removable media, the media must be added before testing.

    Software requirements

    The following software is required to run the Media Player tests:

    • No additional software is needed.
    • Marcado como Resposta kainyang quarta-feira, 2 de dezembro de 2009 09:58
    quarta-feira, 2 de dezembro de 2009 04:39
    Moderador
  • 3Q!!!
    quarta-feira, 2 de dezembro de 2009 09:58