none
辅助域控的服务里面没有File Replication Service RRS feed

  • 问题

  • 最近通过dcdiag发现windows server 2003辅助域控提示ntfrs服务未安装。通过在服务里面查看,发现也没有File Replication Service这项服务?

    这需要怎么修复或安装才能恢复File Replication Service这个项服务啊?能否给点建议或解决办法啊?不要重装服务器,那是最后无法解决才考虑的办法。

    C:\Program Files\Support Tools>dcdiag /test:services

    Domain Controller Diagnosis

    Performing initial setup:
       Done gathering initial info.

    Doing initial required tests

       Testing server: Default-First-Site\xxxxserver

          Starting test: Connectivity
             ......................... xxxxserver passed test Connectivity

    Doing primary tests

       Testing server: Default-First-Site\xxxxserver

          Starting test: Services
                Could not open NtFrs Service on [xxxxserver]:failed with 1060: 指
    定的服务未安装。
             ......................... xxxxserver failed test Services

       Running partition tests on : TAPI3Directory

       Running partition tests on : ForestDnsZones

       Running partition tests on : DomainDnsZones

       Running partition tests on : Schema

       Running partition tests on : Configuration

       Running partition tests on : ****

       Running enterprise tests on :****.com.cn

    2013年1月28日 8:57

答案

  • 谢谢,可是页面打不开。

    页面没有找到

    我们很抱歉,您要求的网页无法被发现。请检查你的输入,然后再试一次,或使用此页面上的搜索选项。

    嗯?奇怪,我这边可以啊~~~给你拷下来了

    Ensure the followings on DCs-
    1. Each DC / DNS server points to its private IP address as primary DNS server and other internal DNS servers as secondary ones 
    2. Each DC has just one IP address and one network adapter is enabled (disable unused NICs).
    3. If multiple NICs (enabled and disabled) are present on server, make sure the active NIC is on top in NIC binding.
    4. Contact your ISP and get valid DNS IPs from them and add it in to the forwarders, Do not set public DNS server in TCP/IP setting of DC.

    Once you are done with above, run "ipconfig /flushdns & ipconfig /registerdns", restart DNS and NETLOGON service on each DC.

    Now run "repadmin /syncall /AdeP" and wait for some time for replication.

    Even after replication if sysvol folder is not replicated you need to perfrom authorative and non authorative restore of sysvol.

    1) Normally for an Authoritative Restore you stop at NTFRS services on all DCs.
    2) Set burflags to D4 on a known good sysvol (or at this time restore sysvol data from backup then set burflags to D4) then start NTFRS on this server.  You may want to rename the old folders with .old extensions prior to restoring good data.
    3) Clean up the folders on all the remaining servers (Policies, Scripts, etc) - renamed them with .old extensions.
    4) Set burflags to D2 on all remaining servers and start NTFRS.
    5) Wait for FRS to replicate.
    6) Clean up the .old stuff if things look good.

    In your case assuming you have two dc in the network.

    1.First take the backup of policies and script folder from sysvol folder in 1st DC i.e copy the polices and script folder to alternate location as a backup.

    2.Peform D4(knowas as authorative) on healthy DC  i.e first DC where policies and script folder is present in sysvol.

    3.Perform D2(knows as non-authorative) on second installed DC where sysvol folder is not replicated.

    Reference link:http://support.microsoft.com/kb/290762

    This is probably what you need to do to get it back.

    Hope this helps


    在IT的路上,You'll never walk alone

    2013年1月28日 9:48

全部回复

  • 参考下:

    http://social.technet.microsoft.com/Forums/en/winserverDS/thread/84fda90f-7837-4896-9175-bf8d0a28814b


    在IT的路上,You'll never walk alone

    2013年1月28日 9:02
  • 谢谢,可是页面打不开。

    Page Not Found

    We're sorry, but the page you requested could not be found. Please check your typing and try again, or use the search options on this page.

    2013年1月28日 9:05
  • 谢谢,可是页面打不开。

    页面没有找到

    我们很抱歉,您要求的网页无法被发现。请检查你的输入,然后再试一次,或使用此页面上的搜索选项。

    嗯?奇怪,我这边可以啊~~~给你拷下来了

    Ensure the followings on DCs-
    1. Each DC / DNS server points to its private IP address as primary DNS server and other internal DNS servers as secondary ones 
    2. Each DC has just one IP address and one network adapter is enabled (disable unused NICs).
    3. If multiple NICs (enabled and disabled) are present on server, make sure the active NIC is on top in NIC binding.
    4. Contact your ISP and get valid DNS IPs from them and add it in to the forwarders, Do not set public DNS server in TCP/IP setting of DC.

    Once you are done with above, run "ipconfig /flushdns & ipconfig /registerdns", restart DNS and NETLOGON service on each DC.

    Now run "repadmin /syncall /AdeP" and wait for some time for replication.

    Even after replication if sysvol folder is not replicated you need to perfrom authorative and non authorative restore of sysvol.

    1) Normally for an Authoritative Restore you stop at NTFRS services on all DCs.
    2) Set burflags to D4 on a known good sysvol (or at this time restore sysvol data from backup then set burflags to D4) then start NTFRS on this server.  You may want to rename the old folders with .old extensions prior to restoring good data.
    3) Clean up the folders on all the remaining servers (Policies, Scripts, etc) - renamed them with .old extensions.
    4) Set burflags to D2 on all remaining servers and start NTFRS.
    5) Wait for FRS to replicate.
    6) Clean up the .old stuff if things look good.

    In your case assuming you have two dc in the network.

    1.First take the backup of policies and script folder from sysvol folder in 1st DC i.e copy the polices and script folder to alternate location as a backup.

    2.Peform D4(knowas as authorative) on healthy DC  i.e first DC where policies and script folder is present in sysvol.

    3.Perform D2(knows as non-authorative) on second installed DC where sysvol folder is not replicated.

    Reference link:http://support.microsoft.com/kb/290762

    This is probably what you need to do to get it back.

    Hope this helps


    在IT的路上,You'll never walk alone

    2013年1月28日 9:48
  • 如果AD Server 没有这项服务,说明你们AD服务器之间的链接都是无效的。你最好重装这台AD 服务器。

    如果你不想重装,可以尝试从主AD中导入NTFRS服务的注册表,但是我估计没什么用。


    技术超级500人群:66140619 第三波(Acer)上海分公司招聘技术工程师: ------------------------------------- 熟悉一门或者多门微软技术、个性鲜明并能够主动处理问题,客户沟通能力良好! 一年14薪左右、年度TechED(依据实际表现),免费参加微软各类技术培训。 工作职责:提供客户 Daily Support & On-site support,与技术主管及Partner合作达成项目工总目标! 详情加群交流!

    2013年1月28日 16:56
    版主
  • 补充一下:

    我有4台域控,两台是windows 2008 r2,其中一台是主域控,并占有5个角色,两台window 2003 R2 为辅助域控,四台域控站点拓扑复制均正常,目前问题是新创建的组策略在同一版本的操作系统中能正常打开并编辑 。但是如果在wiondws 20003上创建的组策略,在2008上则提示无权限打开;在2008上创建的组策略,则通过2003的服务器打不开,也是提示无权限操作。后来发现在两台windows 2003域控上都没有File Replication Service这项服务,注册表里面也没有ntfrs这项键值。因此我怀疑是否是因为windows 2003缺少了这个服务而导致windows 2003与windows 2008之间组策略复制产生了问题。

    2013年1月29日 0:56