none
win2008r2sp1版本系统出现蓝屏 RRS feed

  • 问题

  • win2008r2sp1版本系统出现蓝屏,如下是完整的蓝屏dmp文件信息,麻烦请分析下原因

    Microsoft (R) Windows Debugger Version 10.0.18206.1001 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\Users\fd\Desktop\090518-69701-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available


    ************* Path validation summary **************
    Response                         Time (ms)     Location
    Deferred                                       srv*
    Symbol search path is: srv*
    Executable search path is: 
    Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
    Product: Server, suite: TerminalServer DataCenter SingleUserTS
    Built by: 7601.23677.amd64fre.win7sp1_ldr.170209-0600
    Machine Name:
    Kernel base = 0xfffff800`01665000 PsLoadedModuleList = 0xfffff800`018a7730
    Debug session time: Wed Sep  5 11:07:03.966 2018 (UTC + 8:00)
    System Uptime: 118 days 17:17:10.847
    Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    .

    Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
    Run !sym noisy before .reload to track down problems loading symbols.

    ..............................................................
    ................................................................
    ....................
    Loading User Symbols
    Loading unloaded module list
    ..................................................

    ************* Symbol Loading Error Summary **************
    Module name            Error
    ntoskrnl               The system cannot find the file specified

    You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the command that caused symbols to be loaded.
    You should also verify that your symbol search path (.sympath) is correct.
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck D1, {50, 2, 0, fffff88000e8d250}

    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_EPROCESS                                  ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    Unable to load image \SystemRoot\system32\DRIVERS\NETIO.SYS, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for NETIO.SYS
    *** ERROR: Module load completed but symbols could not be loaded for NETIO.SYS
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KTHREAD                                   ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that     ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    Probably caused by : ntoskrnl.wrong.symbols.exe ( nt_wrong_symbols!589C915D5E6000 )

    Followup:     MachineOwner
    ---------

    nt+0x6f440:
    fffff800`016d4440 48894c2408      mov     qword ptr [rsp+8],rcx ss:0018:fffff800`014d6cb0=000000000000000a

    2018年9月5日 8:24

全部回复

  • 您好:
    ”***** Kernel symbols are WRONG. Please fix symbols to do analysis“ symbol添加提示错了,这无法分析。

    symbol是WinDbg关键的数据库,如果没有它,WinDbg无法分析出更多问题原因。所以使用WinDbg设置symbol,是非常必要的。 您可以 1、运行WinDbg软件,然后按【Ctrl+S】弹出符号表设置窗 2、将符号表地址:SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols粘贴在输入框中,点击确定即可。
    您可以参考以下文档进行排障分析

    https://blog.csdn.net/bcbobo21cn/article/details/60468969



    2018年9月6日 11:17
  • 您好:
    ”***** Kernel symbols are WRONG. Please fix symbols to do analysis“ symbol添加提示错了,这无法分析。

    symbol是WinDbg关键的数据库,如果没有它,WinDbg无法分析出更多问题原因。所以使用WinDbg设置symbol,是非常必要的。 您可以 1、运行WinDbg软件,然后按【Ctrl+S】弹出符号表设置窗 2、将符号表地址:SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols粘贴在输入框中,点击确定即可。
    您可以参考以下文档进行排障分析

    https://blog.csdn.net/bcbobo21cn/article/details/60468969

    您的问题有进展吗?


    2018年9月11日 6:06
  • 您好:

              按着你的方法,如下信息请帮忙分析下:

    Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\Users\fd\Desktop\090518-69701-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is: 
    Map \SystemRoot\system32\ntoskrnl.exe:
      Image region 600:19e600 does not fit in mapping
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
    Product: Server, suite: TerminalServer DataCenter SingleUserTS
    Built by: 7601.23677.amd64fre.win7sp1_ldr.170209-0600
    Machine Name:
    Kernel base = 0xfffff800`01665000 PsLoadedModuleList = 0xfffff800`018a7730
    Debug session time: Wed Sep  5 11:07:03.966 2018 (UTC + 8:00)
    System Uptime: 118 days 17:17:10.847
    Map \SystemRoot\system32\ntoskrnl.exe:
      Image region 600:19e600 does not fit in mapping
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    ....................
    Loading User Symbols
    Loading unloaded module list
    ..................................................
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck D1, {50, 2, 0, fffff88000e8d250}

    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    Probably caused by : NETIO.SYS ( NETIO!StreamInvokeCalloutAndNormalizeAction+1d0 )

    Followup: MachineOwner
    ---------

    2018年9月17日 6:23
  • 你好,dmp原文件我上传到百度云盘,麻烦请下载帮忙查看下,谢谢!

    https://pan.baidu.com/s/1KVZu1pOhCuONtboV2moUjg

    密码:enc3

    2018年9月17日 6:49
  • 感谢您的上传,我看看是否能发现问题。
    2018年9月21日 11:46
  • 您好:
        您问题服务器上是否有恶意软件删除工具或者防间谍软件在运行。可否停用,看看是否有效果。然后看看最近的杀毒日志。看看是否是由于它造成系统蓝屏。
    Probably caused by : NETIO.SYS ( NETIO!StreamInvokeCalloutAndNormalizeAction+1d0 )
    https://answers.microsoft.com/en-us/windows/forum/all/netiosys-driverirqlnotlessorequal-palemoon/d4ad9243-f8c1-4442-beb6-5fc71f05f6e0
    2018年9月23日 10:01