locked
請問KB3041015正確設定方法 RRS feed

  • 問題

  • 你好,

    原因:由於一台新安裝的主機,
    有安裝BESR 2010並於排程備份時出現錯誤訊息
    "系統資源不足,無法完成要求的服務錯誤訊息與"
    但Symantec官方建議解法
    http://seer.entsupport.symantec.com/docs/321401.htm
    有一項使用微軟KB304101
    http://support.microsoft.com/kb/304101/en-us

    但是此KB的敘述不太了解,想請問一下

    1.在此機碼節點
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
    新增1個DWORD為PoolUsageMaximum值為60
    但後面又
    說明1若不成功則要調成40,若成功則逐步往上加25%一直到不成功
    說明2不可超過60
    意思是否要找到能成功的最大值即可?且不可超過60?

    2.另外一個機碼是否一定要設定PagedPoolSize ?

    [主機資訊]
    Windows 2003 R2 Standrad SP2繁體中文
    Phyical Memory有16GB但作業系統限制所以系統只用4G
    HDD
    146GB x 2 (Raid1 C:\50GB, E:\96GB)
    300GB x 5 (Raid5 D:\1.1TB) 使用約120GB
    BESR備份C與D到遠端網路磁碟機

    2010年5月6日 上午 10:17

解答

  • From the KB, I read the english version,

  • Use 60 as your initial value. If your backup does not succeed, use 40 as your value. If that does not work, you must change the behavior of your backup program to reduce the demand of paged pool. If the value works, you may want to increase the value by approximately 25 percent until the backup does not work. If the backup is unsuccessful, use the second registry setting that is described in this article.
  • Make sure that the value for this registry setting is not more than 60.

    Answer (1)
    1) You can try to set 60 first;
    2) If fail in (1), Try 40;
    3) If fail in (2), you have to change setting in the backup program;
    4) If OK in (2), try 40 * 25%;

    So it is what you said. And the max value you can try is 60, never over 60.

    Answer (2)
    If Step (3) still fail, then you have to change the PagedPoolSize.


  • 大家一齊探討、學習和研究,謝謝!
    Microsoft MVP, Microsoft Community Star(TW & HK), MCT,
    MCSD, MCAD, MCSE+I, MCDBA, MCDST, MCSA, MCTS, MCITP, MCPD
2010年5月7日 上午 07:45