locked
Windows 2008 server can not install SP2 RRS feed

  • 問題

  • Dear customer,

    本人姓簡,公司內有部裝有一台Windows Server 2008 Standard Edition的伺服器,最近由SP1升級至SP2時出現問題,本人把SP2檔案"Windows6.0-KB948465-X64.exe"下戴至伺服 器並執行安裝時出現以下錯誤. 請問各位怎樣可以解決這問題 ?

    You need to install Windows Server@ Service Paxck 1 before continuing.

    After you install Windows Server@ Service Pack 1, restart this installation.




    2012年11月6日 上午 05:44

解答

  • Hi,

    Since different update or error code may need different files to replace, please first run System Update Readiness Checking to find which files are missing.

    Then, you can extract and replace the missing files using the method in the following thread:

    http://social.technet.microsoft.com/Forums/en-US/winservermanager/thread/8f85073b-af2a-472f-95c8-c8dce3e60c71

    If the problem continues, please revert back with the CheckSUR.log.


    如果您对我们的论坛在线支持服务有任何的意见或建议,请通过邮件告诉我们。
    Description: Description: TechNet 论坛好帮手立刻免费下载  TechNet 论坛好帮手

    2012年11月6日 上午 08:56
    版主
  • Hi,

    Did you use the Administrator account to logon?

    Please test in Safe Mode first. If we cannot log into system in Safe Mode, we may have to repair the system or perform Clean Install to solve this issue.

    If the system still cannot allow login after disabling all startup items, let’s try to check system files.

    1.    Boot into Safe Mode. Insert your Windows  CD, click Start, click Run, type "sfc /scannow".
    2.    If no error was found, please help to collect the following information for research.
    a.    When did the issue start to occur?
    b.    Is there any software or hardware installed on this system?

    To perform In-Place upgrade, you can refer to the following KB:
    816579 How to Perform an In-Place Upgrade of Windows Server 2003
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;816579

    Thanks.

    微软一站式示例脚本库: http://blogs.technet.com/b/onescript

    2012年11月30日 上午 08:30
    版主

所有回覆

  • Hi,

    Since different update or error code may need different files to replace, please first run System Update Readiness Checking to find which files are missing.

    Then, you can extract and replace the missing files using the method in the following thread:

    http://social.technet.microsoft.com/Forums/en-US/winservermanager/thread/8f85073b-af2a-472f-95c8-c8dce3e60c71

    If the problem continues, please revert back with the CheckSUR.log.


    如果您对我们的论坛在线支持服务有任何的意见或建议,请通过邮件告诉我们。
    Description: Description: TechNet 论坛好帮手立刻免费下载  TechNet 论坛好帮手

    2012年11月6日 上午 08:56
    版主
  • Dear Tom,

    Thanks for you solution.  But I can't login to server at this moment. How can I login first and then try your provide suggestion ? thanks

    Regards

    Vincent






    2012年11月9日 上午 01:57
  • Hi,

    Did you use the Administrator account to logon?

    Please test in Safe Mode first. If we cannot log into system in Safe Mode, we may have to repair the system or perform Clean Install to solve this issue.

    If the system still cannot allow login after disabling all startup items, let’s try to check system files.

    1.    Boot into Safe Mode. Insert your Windows  CD, click Start, click Run, type "sfc /scannow".
    2.    If no error was found, please help to collect the following information for research.
    a.    When did the issue start to occur?
    b.    Is there any software or hardware installed on this system?

    To perform In-Place upgrade, you can refer to the following KB:
    816579 How to Perform an In-Place Upgrade of Windows Server 2003
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;816579

    Thanks.

    微软一站式示例脚本库: http://blogs.technet.com/b/onescript

    2012年11月30日 上午 08:30
    版主